23481461 Acp Kit | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta EVC2 Active Corrosion Protection Kit - Single Sterndrive - Part Number: 23481461

A genuine Volvo Penta Active Corrosion Protection system for one compatible EVC2 Aquamatic sterndrive. The electronic system monitors and controls protective current around the drive, while retaining a backup sacrificial anode. It is intended for approved fibreglass-hull installations in salt or brackish water.

Kit Contents:

• 1 × ACP drive-side anode / transom assembly - 23025859

• 1 × O-ring - 968011

• 1 × retaining nut - 23024520

• 1 × six-point socket screw - 78467259

• 1 × heat-shrink tube - 23137024

• 1 × sealing plug - 3840433

• 1 × ACP wiring harness - 23016635

• 1 × ACP electronic control unit - 23481339

• 1 × AUX-bus connection cable / Y-splitter - 21825665

• 1 × sealing plug - 995664

• 1 × six-pole extension cable, 1500mm - 3889410

• 1 × protected power / fuse-holder arrangement - serviced within complete kit 23481461

• 1 × installation and commissioning instruction package - supplied under 23481461

⚙️ Key Features

• Genuine Volvo Penta EVC2 single-drive ACP system

• Correct Volvo Penta part number 23481461

• Electronically monitored corrosion protection

• Includes control unit, drive-side assembly, wiring and sealing hardware

• Retains a backup sacrificial anode for fail-safe protection

🔄 Supersession & Cross Reference

OEM Supersession Chain:

• 23481461 current EVC2 single-installation ACP-kit reference

OEM / Related Numbers:

• 23481461

• VOE23481461

• 23025859

• 968011

• 23024520

• 78467259

• 23137024

• 3840433

• 23016635

• 23481339

• 21825665

• 995664

• 3889410

Aftermarket / Verified Equivalents:

• MOPA Motorparts OEM-replacement supply reference: 23481461

🚤 Compatibility

Commonly used on:

• Volvo Penta EVC2 single-engine Aquamatic installations

• Electronic corrosion protection in salt and brackish water

Typically suits:

• Engine / drive models:

• DPI sterndrive installations

• DPH sterndrive installations

• DPS and SX sterndrive installations where the ACP configuration is approved

• DPR and FWD installations where the Volvo Penta configuration system specifies 23481461

• Requires EVC-C2 or later and a compatible Volvo Penta display or Glass Cockpit

• Installation Type: Single sterndrive

• Hull Type: Fibreglass / non-metallic hull unless a specific approved isolation arrangement is documented

• Water Type: Salt and brackish water

• Serial Range: Drive, transom shield, EVC and vessel-CIN controlled

🔌 Function

The ACP control unit measures the corrosion-protection condition and applies controlled protective current to the drive and transom assembly, reducing galvanic attack while reporting system status through EVC.

Common signs of failure:

• ACP alarm or low-protection warning appears on the display

• Drive-side electrode or anode assembly is damaged or coated

• Open circuit, poor bonding or corroded wiring connector

• Control unit has no protected power supply

• Rapid drive corrosion despite a serviceable backup anode

📦 Condition

• Genuine Volvo Penta part

• Brand new

• Supplied in original or equivalent packaging