468891 Stud | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta stud from the Inlet and Exhaust System group, weighing 0.02268 kg and listed for 43 applications across the TD, TWD, TID and TAD series. Studs in this group take the clamping loads on manifold and turbocharger joints that run through repeated heat cycles.

🚤 Compatibility

• Engine Family: TD, TWD, TID, TAD

Full model list at the end of this description.

⚙️ Key Features

• Inlet and Exhaust System stud
• 0.02268 kg
• 43 applications across the TD, TWD, TID and TAD series
• Suits repeated heat-cycled joints
• 4 used per assembly

🔌 Function

Provides a fixed threaded post that a nut pulls against, so the joint can be clamped without cutting a fresh thread in the casting each time it is opened.

⚠️ Common Signs of Failure

• Exhaust ticking or blowing from the flange the stud clamps
• Stud snapped off flush with the casting
• Thread necked, stretched or corroded thin
• Nut seized solid on the exposed thread
• Soot tracking around the joint face

🛠️ Service Notes

• Renew studs in a set rather than singly - the neighbours will have seen the same heat
• Check the casting thread is clean and full-depth before fitting a new stud

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta TID121KG, TID121KGP, TID121KP, TID121KPB, TID121L, TID121LG, TID121LGP, TID121LP, TID121LPB, TID121FG, TID121K, TID121K-87
• Volvo Penta TD121G-87, TD121GGP-87, TD121G, TD121GG, TD121GGP, TD121GP, TD121GPB
• Volvo Penta TD120G, TD120GG PP, TD120HP, TD120HPP, TD120GG
• Volvo Penta TWD1210G, TWD1210P, TWD1210PB, TWD1210V
• Volvo Penta TWD1211V, TWD1211P, TWD1211G
• Volvo Penta TAD1230G, TAD1230V
• Volvo Penta TID120FG, TID120HPP
• Volvo Penta TWD1230ME, TWD1230VE
• Volvo Penta TAD1231GE
• Volvo Penta TAD1232GE
• Volvo Penta TD1210G
• Volvo Penta TD70G-83
• Volvo Penta TID70G
• Volvo Penta TWD1231VE