67F-W0093-00 Aftermarket Yamaha Carburetor Kit F80B/C, F100/B/D, F115A | Sawley's Select Marine Parts

🔧 Product Description

Aftermarket Yamaha F75-F100 carburettor repair kit - Replacement Part Number: 67F-W0093-00

A complete carburettor service kit for selected Yamaha F75, F80, F90 and F100 four-stroke outboards. It does not service fuel-injected F115A engines. The kit contains the individually numbered float, needle valve, filter, seals, gaskets and hardware listed below.

⚙️ Key Features

• Exact OEM service-component numbers listed below

• Designed for carburetted Yamaha F75-F100 engines

• Cross-references to Mercury and Sierra service kits

• Includes float, needle-valve assembly and filter element

• Not suitable for EFI F115A engines

🔄 Supersession & Cross Reference

OEM Supersession Chain:

• 67F-W0093-02 and 67F-W0093-03 are later related service revisions

• 67F-W0093-00 (early service reference)

OEM / Related Numbers:

• 67F-W0093-00

• 67F-W0093-02

• 67F-W0093-03

Aftermarket / Verified Equivalents:

• Sierra: 18-7743

• Mercury/Mariner: 804346T1

• Mercury/Mariner: 804346T02

• Recmar: REC67F-W0093-00

Included Components:

• 1 × O-ring - Part Number: 67F-14147-00-00

• 4 × Screws with washers - Part Number: 97980-04114-00

• 1 × O-ring - Part Number: 67F-14397-00-00

• 1 × Float-chamber gasket - Part Number: 67F-14984-00-00

• 1 × O-ring - Part Number: 93210-04230-00

• 1 × Float - Part Number: 6H4-14985-01-00

• 1 × Float pin - Part Number: 676-14186-00-00

• 1 × Clip - Part Number: 633-14159-00-00

• 1 × Float-arm pin - Part Number: 6H4-14548-00-00

• 1 × Needle-valve assembly - Part Number: 6H3-14590-01-00

• 1 × O-ring - Part Number: 93210-04228-00

• 1 × O-ring - Part Number: 67F-14398-00-00

• 2 × O-rings - Part Number: 67F-14398-10-00

• 1 × O-ring - Part Number: 67F-14398-20-00

• 1 × Seal - Part Number: 67F-14239-00-00

• 1 × Filter element - Part Number: 67F-14371-01-00

• 2 × O-rings - Part Number: 93210-40M10-00

• 1 × O-ring - Part Number: 67F-14398-30-00

• Application Correction: Yamaha F115A is fuel injected and does not use this carburettor repair kit.

🚤 Compatibility

Commonly used on:

• Yamaha carburetted outboards using the listed OEM carburettor service kit

Typically suits:

• Engine models:

• Yamaha F75 carburetted four-stroke

• Yamaha F80B and F80C

• Yamaha F90 carburetted four-stroke

• Yamaha F100, F100B and F100D

• HP Range: 75HP - 100HP

• Engine Type: Carburetted four-stroke outboard

• Year Range: Early carburetted applications through approximately 2002; later engines may require -02 or -03 kits

• Quantity Required: Confirm by carburettor-bank configuration

🔌 Function

The kit renews the carburettor's float-control, inlet-valve and sealing components. Correct rebuilding restores fuel-bowl level, prevents air and fuel leaks and stabilises the mixture from starting through full-load operation.

Common signs of failure:

• Hard starting or excessive choke/enrichment required

• Rough idle, hunting or repeated low-speed stalling

• Hesitation, flat spots or intake backfire during acceleration

• Fuel leakage, flooding or an incorrect float-bowl level

• Lean surging, reduced power or fuel starvation under load

• Rich running, smoke, spark-plug fouling or excessive fuel consumption

📦 Condition

• Brand new aftermarket replacement part

• New and unused

• Supplied in manufacturer or equivalent protective packaging