1
/
of
1
944707 O-Ring | Genuine Volvo Penta Part
944707 O-Ring | Genuine Volvo Penta Part
Regular price
$9.64 AUD
Regular price
Sale price
$9.64 AUD
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
🔧 Product Description
Genuine Volvo Penta o-ring, part number 944707, listed in the Gaskets and Seals group. It seals a joint by being compressed into its groove, and is renewed whenever the joint it seals is disturbed. Volvo Penta publishes no fitment, dimensions or assembly detail against this number, so check it against the parts list for your own engine before ordering.
⚙️ Key Features
- Genuine Volvo Penta o-ring
- Gaskets and Seals group
- Renew whenever the joint it seals is opened
- No fitment or dimensions published against this number — check it against the parts list for your engine
🔌 Function
Seals a joint by being compressed into its groove, and is renewed whenever the joint it seals is disturbed.
⚠️ Common Signs of Failure
- A slow weep, drip or wet film at a joint face, union or plug that returns after wiping
- Coolant, oil or fuel loss with no cracked or damaged component to account for it
- Air drawn into a fuel or suction line, giving hard starting, a hunting idle or a rough run
- Seepage that reappears shortly after a joint has simply been re-tightened
- A ring found flattened, twisted, nicked or hardened and squared-off when the joint is opened
🛠️ Service Notes
- Always fit a new O-ring — never refit one that has been removed, as it has already taken a set in its groove
- Clean the groove and both sealing faces and check them for nicks, scoring and corrosion pitting; a damaged groove will leak however good the new seal is
- Smear the ring with a little clean lubricant compatible with the fluid it seals, then roll it into place by hand so it sits untwisted and fully in its groove
- Never lever an O-ring over a sharp edge or thread with a screwdriver; use a blunt plastic tool and protect any edge the ring has to pass
- Assemble the joint squarely and tighten to the figure and sequence given in the workshop manual for your engine — over-tightening extrudes the ring and causes the very leak you were curing
🔄 Supersession & Cross Reference
Aftermarket / Verified Equivalents
- SLP: OR-707
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
Share
