0174817 0778773 Evinrude/Johnson 9 1/4 x 11 Aluminium Propeller | Genuine Used Part
0174817 0778773 Evinrude/Johnson 9 1/4 x 11 Aluminium Propeller | Genuine Used Part
Out of stock
Couldn't load pickup availability
🔧 Product Description
Genuine Evinrude Johnson 9 1/4 x 11 Aluminium Propeller - Part Number: 0174817 / 0778773
A genuine used three-blade right-hand aluminium propeller for selected Evinrude and Johnson 8HP, 9.9HP and 15HP outboards using the 13-spline thru-hub-exhaust gearcase.
Original part 0174817 was catalogued as a 9 x 11 propeller. The current BRP service propeller 0778773 uses the updated nominal size of 9 1/4 x 11 while retaining the same 11-inch pitch application. Correct selection must be confirmed by spline count, model year and the engine's recommended wide-open-throttle RPM.
⚙️ Key Features
- Genuine BRP / Evinrude / Johnson OEM propeller
- Original part 0174817 with current service reference 0778773
- Three-blade aluminium construction with right-hand rotation
- Current nominal size: 9 1/4-inch diameter x 11-inch pitch
- 13-spline hub for the applicable small-outboard thru-hub-exhaust gearcase
🚤 Compatibility
Commonly used on
- Evinrude and Johnson small-outboard propeller systems using a 13-spline thru-hub-exhaust shaft
- The 0174817 / 0177160 / 0778773 11-pitch propeller family
Typically suits
- Engine models:
- Johnson / Evinrude 9.9HP two-stroke - 1974-2005
- Johnson / Evinrude 15HP two-stroke - 1974-2005
- Johnson / Evinrude 8HP four-stroke - 1996-2005
- Johnson / Evinrude 9.9HP four-stroke - 1995-2001
- Johnson / Evinrude 15HP four-stroke - 1995-2001
- Not suitable for 2002-and-newer Suzuki-manufactured 9.9HP / 15HP four-strokes using the 14-spline propeller shaft
- HP Range: 8HP - 15HP
- Engine Type: Evinrude / Johnson two-stroke and early four-stroke outboard with 13-spline thru-hub-exhaust gearcase
- Year Range: Approximately 1974 - 2005, model and spline controlled
🔌 Function
The propeller converts engine torque into forward thrust. Its 11-inch pitch is commonly used where the boat and load require a balance of acceleration, planing performance and engine RPM within the manufacturer's full-throttle operating range.
⚠️ Common Signs of Failure
- Blades are bent, chipped or cracked
- Rubber hub slips and engine RPM rises without matching boat speed
- Propeller vibration increases with engine speed
- Blade-edge damage causes cavitation or poor acceleration
- Hub splines are worn, corroded or damaged
🔄 Supersession & Cross Reference
OEM Supersession Chain
- 0778773 → Supersedes 0177160
- 0177160 → Supersedes 0174817
- 0174817 earlier 9 x 11 three-blade aluminium propeller reference
OEM / Related Numbers
- 0174817
- 174817
- 0177160
- 177160
- 0778773
- 778773
- 0765756
- 765756
Aftermarket / Verified Equivalents
- Solas Amita 3: 2111-093-11 - 9 1/4 x 11 three-blade aluminium
- Solas Amita 4: 2113-093-11 - 9 1/4 x 11 four-blade aluminium alternative
- Solas Saturn: 2121-093-11 - 9 1/4 x 11 three-blade stainless-steel alternative
- Michigan Wheel: 12013 - 9 1/4 x 11 aluminium replacement family
📦 Condition
- Genuine used part
- Removed from running engine where applicable
- In good working condition unless otherwise stated
Share
