0386909 0763461 Evinrude/Johnson 12 1/2 x 13 Aluminium Propeller – 13 Spline | Genuine Used Part
0386909 0763461 Evinrude/Johnson 12 1/2 x 13 Aluminium Propeller – 13 Spline | Genuine Used Part
Low stock: 1 left
Couldn't load pickup availability
✓ Authorised Volvo Penta Dealer · Genuine used marine parts · Ships Australia-wide
🔧 Product Description
Genuine Evinrude Johnson 12 1/2 x 13 Aluminium Propeller - Part Number: 0386909 / 0763461
A genuine used three-blade right-hand aluminium propeller for selected Evinrude and Johnson mid-range outboards using the compatible 13-spline gearcase.
The 12 1/2-inch diameter and 13-inch pitch provide strong acceleration and load carrying for smaller planing boats, pontoons and heavier operating loads. Final suitability is controlled by gearcase diameter, shaft spline and full-throttle RPM.
⚙️ Key Features
- Genuine BRP / Evinrude / Johnson aluminium propeller
- 12 1/2-inch diameter x 13-inch pitch
- Three blades with right-hand rotation
- 13-spline pressed rubber hub
- Direct Michigan Wheel replacement available
🚤 Compatibility
Commonly used on
- Evinrude and Johnson mid-range 13-spline outboard gearcases
- Pleasure, commercial and E-TEC applications requiring a 13-pitch propeller
Typically suits
- Engine models:
- Johnson / Evinrude 40HP and 48HP twin-cylinder outboards with the compatible 13-spline gearcase
- Johnson / Evinrude 50HP, 55HP, 60HP, 65HP, 70HP and 75HP outboards with the compatible 13-spline gearcase
- Evinrude E-TEC 40HP, 50HP, 55HP and 60HP
- Johnson 40HP, 50HP, 60HP and 70HP four-stroke models where the same 13-spline gearcase is fitted
- HP Range: 40HP - 75HP
- Engine Type: Evinrude / Johnson two-stroke, E-TEC and applicable four-stroke outboard
- Year Range: Approximately 1970s onward, gearcase and spline controlled
🔌 Function
The propeller converts engine output into thrust. Its 13-inch pitch generally increases acceleration and load-carrying ability compared with higher-pitch propellers.
⚠️ Common Signs of Failure
- Blades are bent, chipped, cracked or out of track
- The rubber hub slips and engine RPM rises without matching boat speed
- Propeller vibration increases with engine speed
- Cavitation, ventilation or poor acceleration develops after impact damage
- Hub splines, drive-pin surfaces or thrust faces are worn or corroded
🔄 Supersession & Cross Reference
OEM Supersession Chain
- 0763461 → Supersedes 0386909
- 0386909 earlier OEM propeller reference
OEM / Related Numbers
- 0386909
- 386909
- 0763461
- 763461
Aftermarket / Verified Equivalents
- Michigan Wheel Match: 011035 - 12 1/2 x 13 aluminium equivalent
- Solas Amita 3: equivalent 12 1/2 x 13 aluminium 13-spline application
- Solas Rubex 3: modular 13-pitch aluminium alternative with the correct hub kit
📦 Condition
- Genuine used part
- Removed from running engine where applicable
- In good working condition unless otherwise stated
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in the condition you received it for a refund or exchange. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
