0529105 Evinrude Johnson Seal | Genuine OEM BRP Outboard Part

🔧 Product Description

Johnson Pump F5B-8 Flexible-Impeller Pump Lip Seal - Part Number: 05-29-105

Catalogue correction: Part number 0529105 corresponds to Johnson Pump number 05-29-105 and is not verified as an Evinrude or Johnson BRP outboard part.

It is a shaft lip seal for selected SPX Johnson Pump flexible-impeller engine-cooling pumps, particularly F5B-8 applications.

The seal prevents cooling water from travelling along the pump shaft and leaking from the pump body or entering the bearing area.

⚙️ Key Features

• Johnson Pump flexible-impeller-pump lip seal

• Correct formatted number 05-29-105

• Common stock format 0529105

• Approximate dimensions 16mm × 28mm × 7mm

• Suitable for selected F5B-8 cooling pumps

• Volvo Penta, Yanmar, Jabsco and Sierra cross-references available

🔄 Supersession & Cross Reference

OEM / Related Numbers:

• Johnson Pump: 05-29-105

• Johnson Pump: 0.2233.001

• Stock Format: 0529105

• Yanmar: X0529105

• Yanmar: X0529105-01

• Volvo Penta: 827247

• Jabsco: SP2700-1027B

Aftermarket / Verified Equivalents:

• Sierra: 18-2045

• Poseidon Marine replacement for X02233001 / X0529105

• Aftermarket 16 × 28 × 7mm marine-pump lip seal

🚤 Compatibility

Used in selected:

• SPX Johnson Pump F5B-8 flexible-impeller pumps

• Engine-mounted raw-water cooling pumps specifying 05-29-105

• Volvo Penta pump applications specifying seal 827247

• Yanmar pump applications specifying X0529105 or X0529105-01

• Compatible Jabsco pump assemblies specifying SP2700-1027B

Important fitment note:

• Verify the pump model stamped on the pump body.

• Do not select the seal using the engine brand alone.

• Measure the shaft and housing where the pump history is unknown.

• Brand identification should be corrected before listing this item as Genuine OEM BRP.

🔌 Function

The seal retains cooling water inside the pump while allowing the shaft to rotate.

Common signs of seal failure:

• Water drips from the pump body

• Rust develops around the shaft or bearing

• Pump bearing becomes noisy

• Salt deposits appear behind the pump

• Seal lip is hardened or torn

• Shaft has a wear groove

• Water contaminates the bearing area

Installation considerations:

• Confirm seal dimensions

• Inspect the shaft for grooves

• Fit the seal in the correct direction

• Lubricate the lip with an approved assembly lubricant

• Use a flat seal driver

• Do not damage the sealing lip

• Inspect the pump bearing and mechanical components

• Replace the impeller and cover gasket where required

📦 Condition

• Brand and packaging must be checked against the physical stock

• Brand new replacement seal

• Not verified as a genuine BRP Evinrude Johnson part

• Supplied in protective or equivalent packaging