0583779 0763762 Evinrude Stator | Genuine Used Part
0583779 0763762 Evinrude Stator | Genuine Used Part
🔥 50% Off All Genuine Used Marine Parts - Limited Time 🔥
Out of stock
Couldn't load pickup availability
🔧 Product Description
Genuine Evinrude Johnson 9 Amp Stator Assembly - Part Numbers: 0583779 / 0763762
A genuine Evinrude Johnson stator assembly used under the flywheel on 60HP, 65HP and 70HP three-cylinder two-stroke outboards. This stator supplies ignition charge output and charging-system output on engines equipped with S.L.O.W. protection systems.
⚙️ Key Features
• Genuine Evinrude Johnson stator assembly
• Correct OEM references 0583779 and 0763762
• 9 amp charging-output stator family
• Used on 3-cylinder 60HP, 65HP and 70HP two-stroke engines
• Supports ignition charge, charging output and S.L.O.W. system operation
🔄 Supersession & Cross Reference
OEM Supersession Chain:
• 0763762 → Supersedes 0584766
• 0584766 → Supersedes / replaces 0584236
• 0584236 → Related later service reference for 0583779
• 0583779 earlier OEM stator assembly reference
OEM / Related Numbers:
• 0763762
• 763762
• 0584766
• 584766
• 0584236
• 584236
• 0583779
• 583779
Aftermarket / Verified Equivalents:
• CDI Electronics: 173-4766
• Aftermarket reference: 173-4766
• Recmar-style replacement: REC0763762
🚤 Compatibility
Commonly used on:
• Evinrude Johnson 3-cylinder two-stroke outboards
• 60HP to 70HP S.L.O.W. ignition systems using the 0583779 / 0763762 stator family
Typically suits:
• Engine models:
• Evinrude 60HP 3-cylinder two-stroke - 1989-1998 S.L.O.W. ignition applications
• Johnson 60HP 3-cylinder two-stroke - 1989-1998 S.L.O.W. ignition applications
• Evinrude 65HP 3-cylinder two-stroke - 1989-1998 S.L.O.W. ignition applications
• Johnson 65HP 3-cylinder two-stroke - 1989-1998 S.L.O.W. ignition applications
• Evinrude 70HP 3-cylinder two-stroke - 1989-1998 S.L.O.W. ignition applications
• Johnson 70HP 3-cylinder two-stroke - 1989-1998 S.L.O.W. ignition applications
• Johnson / Evinrude 3-cylinder 3.187-inch bore Looper 60HP stator systems
• Johnson / Evinrude 3-cylinder 3.187-inch bore Looper 65HP stator systems
• Johnson / Evinrude 3-cylinder 3.187-inch bore Looper 70HP stator systems
• HP Range: 60HP - 70HP
• Engine Type: Evinrude Johnson 3-cylinder two-stroke outboard
• Year Range: approximately 1989-1998
• Charging Output: 9 amp stator family
• Ignition Type: S.L.O.W. ignition system
🔌 Function
The stator generates electrical output beneath the flywheel. It supplies ignition charge voltage to the power pack and charging current to the rectifier / regulator circuit so the engine can maintain spark and battery charging.
Common signs of failure:
• Weak or missing spark
• Battery not charging
• Engine enters S.L.O.W. mode due to ignition-side faults
• Hard starting after warm-up
• Misfire under throttle
• Burnt or darkened stator windings
• Cracked insulation or damaged stator leads
• Low DVA output during cranking or running tests
📦 Condition
• Genuine used part
• Removed from running engine where applicable
• In good working condition unless otherwise stated
Share
