0779713 Evinrude Johnson XD100 Synthetic Formula Direct Injection Oil | Genuine OEM BRP Outboard Part
0779713 Evinrude Johnson XD100 Synthetic Formula Direct Injection Oil | Genuine OEM BRP Outboard Part
Couldn't load pickup availability
✓ Authorised Volvo Penta Dealer · Marine & auto specialists · Ships Australia-wide
🔧 Product Description
Genuine BRP XPS Marine XD100 Synthetic-Formula Two-Stroke Oil - Five US Gallons - Part Number: 0779713
Genuine BRP XPS Marine XD100 premium synthetic-formula two-stroke outboard oil supplied in a five-US-gallon bulk container.
Five US gallons is approximately 18.93 litres.
XD100 is formulated for Evinrude E-TEC, direct-injection and compatible oil-injected two-stroke outboards. It provides high lubricity, strong detergency and clean, low-smoke operation.
⚙️ Key Features
- Genuine BRP XPS Marine XD100 oil
- Correct service part number 0779713
- Common reference 779713
- Five US gallons / approximately 18.93 litres
- Premium synthetic-formula two-stroke oil
- Suitable for compatible direct-injection systems
- Low-smoke and low-odour formulation
- Helps minimise piston-ring and combustion deposits
- Excellent cold-temperature flow
- Bulk workshop or high-use container
🚤 Compatibility
Recommended or preferred for selected
- Evinrude E-TEC outboards
- Evinrude E-TEC G2 outboards
- Evinrude direct-injection engines
- Johnson and Evinrude oil-injected two-strokes where XD100 is approved
- Commercial and high-hour engines
- Multi-engine boats
- Engines programmed for exclusive XD100 operation
- Cold-weather operation where the operator's guide recommends XD100
Important operating note
- Do not assume the engine has the reduced-oil XD100 setting because XD100 is already in the reservoir.
- The optional EMM calibration must be performed using the appropriate diagnostic system.
- Keep the oil clean when transferring it from the bulk container.
🔌 Function
XD100 lubricates the crankshaft bearings, connecting rods, pistons, cylinder walls and other internal components in an oil-injected two-stroke engine.
Benefits include
- Reduced internal friction
- Strong protection at high engine load
- Cleaner piston rings
- Reduced combustion deposits
- Improved spark-plug cleanliness
- Lower visible exhaust smoke
- Reliable cold-temperature oil delivery
- Corrosion protection during normal operation
Recommended handling
- Keep the bulk container tightly sealed
- Use a clean transfer pump dedicated to two-stroke oil
- Prevent water, dirt and fuel contamination
- Do not return transferred oil to the container
- Clean around the engine reservoir cap before filling
- Prime the oil system after hose or component replacement
- Confirm warning-system operation
- Store upright away from heat and direct sunlight
⚠️ Common Signs of Failure
Common signs of an oil-system problem
- Low-oil or no-oil warning
- Air bubbles in oil lines
- Water or fuel contaminates the oil reservoir
- Excessive smoke
- Spark plugs foul
- Oil injector or distribution fault
- Engine enters protection mode
- Unusual mechanical noise
- Oil consumption changes unexpectedly
🔄 Supersession & Cross Reference
OEM Supersession Chain
- 0763716
- 763716
- 0779713
- 779713
Related Container Numbers
- 0779711 / 779711 - one-US-gallon container
- 0779712 / 779712 - 2.5-US-gallon container
- 0779730 - 946ml container
- 0779731 - 3.785-litre container
Aftermarket / Verified Equivalents
- No direct aftermarket equivalent for an Evinrude E-TEC EMM programmed for exclusive XD100 use
Oil-substitution warning
- A general TC-W3 oil must not be advertised as a direct XD100 equivalent for an engine programmed to the reduced-oil XD100 setting.
- An authorised technician must change the EMM oil calibration before a different approved oil is used.
- Follow the lubrication requirements for the exact engine model and software calibration.
📦 Condition
- Genuine BRP XPS Marine OEM lubricant
- Brand new sealed five-gallon container
- Total volume approximately 18.93 litres
- Heavy bulk item
- Supplied in genuine or equivalent protective packaging
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
