11129260 Bracket | Genuine Volvo Penta Part

🔧 Product Description

A genuine Volvo Penta support bracket for the crankcase-ventilation oil trap on selected TAD940GE and TAD941GE industrial engines. The bracket carries oil trap 11033878 and keeps the breather hose and return connections in the original position. Correct support is important because the oil trap and hoses are exposed to continuous engine vibration. A distorted or missing bracket can place stress on the breather connections and allow the oil separator to contact adjacent components.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD943VE
• Volvo Penta TAD952VE
• Volvo Penta TAD951VE
• Volvo Penta TAD950VE
• Volvo Penta TAD940GE
• Volvo Penta TAD940VE
• Volvo Penta TAD941VE
• Volvo Penta TAD941GE
• Volvo Penta TAD942VE

• Engine Family: TAD
• Year Range: Approximately 2000s

⚙️ Key Features

• OEM Volvo Penta part number 11129260
• System group: Inlet and Exhaust System
• Net weight 0.95 kg
• Supersedes and replaces previous part number 11128074
• Fits TAD940, TAD941, TAD942, TAD943, TAD950, TAD951 and TAD952 series diesel engines
• Engine type: Volvo inline 6-cylinder D9 turbo-diesel

🔌 Function

The bracket mechanically supports and positions a component within the engine's inlet and exhaust system, transferring its load into the engine or mounting structure. It maintains correct alignment and limits movement caused by vibration and thermal cycling.

⚠️ Common Signs of Failure

• Visible cracking or fracture at bolt holes or stress points
• Corrosion, scaling or material loss weakening the bracket
• Loose, elongated or stripped mounting holes allowing component movement
• Excessive vibration, rattling or knocking noise from the supported assembly
• Misalignment of the attached inlet or exhaust component, leading to leaks or chafing

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

🔄 Supersession & Cross Reference

OEM Supersession Chain

• 11129260 → Supersedes 11128074

OEM / Related Numbers

• 11128074 earlier number superseded by this part
• 11033878 related oil trap
• 1545256 related tensioning band
• 1545257 related retaining screw
• 11128756 related breather hose
• 942810 related attaching clamp

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging