1140032 Sleeve Tube | Genuine Volvo Penta Part

🔧 Product Description

This is a genuine Volvo Penta sleeve tube from the Marine Propulsion group, supplied in the 35 mm diameter by 1500 mm length size. The tube encloses and protects the shaft or line passing through it, and the stated diameter and length are what set this item apart from other sleeve tubes carrying the same name. It is the current replacement for the earlier part number 827176.

🚤 Compatibility

• Engine Family: MD, TMD, AD, AQAD, D, TAMD, MS, BB, AQD
• HP Range: 13-75 HP

Full model list at the end of this description.

⚙️ Key Features

• OEM Volvo Penta part number 1140032
• Dimensions: D=35 mm, L=1500 mm
• System group: Marine Propulsion
• Net weight: 9.5 kg
• Supersedes previous part number 827176
• Fits Volvo Penta D1, D2, MD, TMD, TAMD, AD, AQAD, MS and 2000-series marine engine and drive applications
• Dimensions: 35mm nominal diameter x 1500mm length
• Engine type: Volvo Penta inboard marine diesel

🔌 Function

A sleeve tube encloses the shaft or line that runs through it, providing a protective outer passage that keeps water and debris away while supporting and locating the component inside. The 1500 mm length is cut and fitted to suit the installation during propulsion system assembly or repair.

⚠️ Common Signs of Failure

• External corrosion, pitting or blistering along the tube body
• Water ingress or seepage where the tube passes through the hull or housing
• Scoring, ovality or internal wear from long-term shaft contact
• Cracks, splits or dents from impact or vibration fatigue
• Looseness or movement of the tube in its mounting, causing noise or misalignment

🛠️ Service Notes

• Check the bore is clear and the ends are clean, round and undamaged before fitting — a burred or distorted end will not let the seal or mating part land true
• Renew the O-rings, seals or gaskets that work with the sleeve rather than reusing them, and lubricate rubber seals with a lubricant compatible with the fluid in that system
• Push or draw the sleeve fully home and square in its bore so it seats to the depth the workshop manual for your engine gives, without cocking it or driving on an unsupported edge
• Keep the assembly clean while fitting so no swarf, sealant or grit is carried into the passage the sleeve serves, and check for leaks once the system is up to pressure

🔄 Supersession & Cross Reference

OEM Supersession Chain

• 1140032 → Supersedes 827176

OEM / Related Numbers

• 827176 earlier number superseded by this part
• 1140032 - 35mm x 1500mm
• 1140031 - 35mm x 1000mm
• 1140030 - 35mm x 750mm

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta 2003, 2003R, 2003R SOLAS, 120S-B, 740A, 2003TB, 2003TB SOLAS, 120SC, 2001AG, 2001B, 2001BG, 2001D, 2003D, 2003T, 2003TR, 2002AG, 2002B, 2002BG, 2002D, 2003B, 2003B SOLAS, 2003 SOLAS, 2001, 2002, 2001R
• Volvo Penta D2-40, D2-40B, D2-40F, D2-55, D2-55B, D2-55C, D2-55D, D2-55E, D2-55F, D2-50F, D2-75, D2-75B, D2-75C, D2-75F, D2-60F
• Volvo Penta D1-30, D1-30B, D1-30F, D1-13, D1-13B, D1-13F, D1-20, D1-20B, D1-20F
• Volvo Penta AD41P-B, AD41B, AD41, AD41A, AD41BJ
• Volvo Penta MS10A-A, MS10A-B, MS10L-A, MS10L-B
• Volvo Penta MS15L-A, MS15A-A, MS15A-B, MS15L-B
• Volvo Penta MD22A, MD22L, MD22P
• Volvo Penta MS2B-A, MS2B, MS2V
• Volvo Penta TAMD41B, TAMD41M-A, TAMD41A
• Volvo Penta TMD22A, TMD22B, TMD22P-C
• Volvo Penta TMD40A, TMD40B, TMD40C
• Volvo Penta AD31, AD31B
• Volvo Penta AQAD40B, AQAD40A
• Volvo Penta D41, D41B
• Volvo Penta TAMD31A, TAMD31B
• Volvo Penta TAMD40A, TAMD40B
• Volvo Penta TMD31A, TMD31B
• Volvo Penta TMD41A, TMD41B
• Volvo Penta AD30A
• Volvo Penta AD40B
• Volvo Penta AQAD30A
• Volvo Penta AQD40A
• Volvo Penta BB740A
• Volvo Penta D2002AG
• Volvo Penta D2003AG
• Volvo Penta MD30A
• Volvo Penta MD31A
• Volvo Penta MD40A
• Volvo Penta MS25A-A
• Volvo Penta TAMD22P-B
• Volvo Penta TAMD30A
• Volvo Penta TMD30A