11700325 Bushing | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta bushing 11700325, part of the Engine system group. It acts as a replaceable bearing or locating sleeve within the engine assembly, maintaining correct clearance and alignment between a shaft or fastener and its housing. It is listed for D5A, D7A and D7C marine diesels, the TD and TAD 520 through 760 industrial and generator-set engines, and the MD2010 series.

🚤 Compatibility

• Engine Family: D, TD, TAD, MD
• Year Range: Approximately late 1990s through 2000s

Full model list at the end of this description.

⚙️ Key Features

• Genuine Volvo Penta OEM part number 11700325
• System group: Engine
• Net weight: 0.054 kg
• Fits D5A, D7A, D7C, MD2010 and TD/TAD 520-760 series engines
• Serviceable wear component intended for replacement rather than repair
• Engine type: Volvo Penta D5A / D7A / D7C and corresponding TAD / TD diesel engines

🔌 Function

The bushing provides a sacrificial bearing or locating surface between two components, controlling clearance and reducing direct metal-to-metal wear. It keeps the mating parts correctly aligned so loads are carried evenly during operation.

⚠️ Common Signs of Failure

• Excessive play or free movement in the joint it supports
• Audible knocking, rattling or squeaking under load
• Visible ovality, scoring or elongation of the bore
• Metallic debris or wear particles found near the bushing location
• Misalignment of the mating component causing uneven wear elsewhere

🛠️ Service Notes

• Check the housing bore and the shaft or pin that runs in the bushing before fitting a new one; a worn or scored mating part will chew out a new bushing quickly
• Press bushings in squarely with a press and a correctly sized drift or mandrel — hammering one straight in distorts it and ruins the fit
• Where the bushing has an oil hole, groove or slot, line it up with the feed in the housing before it is pressed home
• Lubricate on assembly with the oil or grease specified for that part of the engine or drive, and follow the manual if it calls for the bore to be checked or sized after fitting
• Do not soak a self-lubricating bushing in solvent or degreaser, and keep sealant and thread lock off the running surface

🔄 Supersession & Cross Reference

Other-Brand OEM Numbers

• VOE11700325 Volvo Construction Equipment reference
• Deutz 04200024
• Kolbenschmidt / bearing reference 77690690
• Glyco: 55-3811 SEMI connecting-rod bushing

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta D7A-B TA, D7A-T, D7A-TA, D7C-B TA, D7C-TA
• Volvo Penta D5A-B TA, D5A-T, D5A-TA
• Volvo Penta MD2010, MD2010B
• Volvo Penta TAD520GE, TAD520VE
• Volvo Penta TAD530GE MECH, TAD530GE EDC4
• Volvo Penta TAD531GE MECH, TAD531GE EDC4
• Volvo Penta TAD720GE, TAD720VE
• Volvo Penta TAD721GE, TAD721VE
• Volvo Penta TAD722GE, TAD722VE
• Volvo Penta TAD730GE MECH, TAD730GE EDC4
• Volvo Penta TAD731GE MECH, TAD731GE EDC4
• Volvo Penta TAD750GE, TAD750VE
• Volvo Penta TD520GE, TD520VE
• Volvo Penta TD720GE, TD720VE PP
• Volvo Penta TAD532GE EDC4
• Volvo Penta TAD550GE
• Volvo Penta TAD551GE
• Volvo Penta TAD732GE EDC4
• Volvo Penta TAD733GE EDC4
• Volvo Penta TAD751GE
• Volvo Penta TAD760VE