11700367 Bracket | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta bracket from the Engine system group, used as a mounting support for engine-mounted components and ancillaries. It is a direct-fit replacement for the original item on D5A, D7A, D7C, TD and TAD series industrial and genset diesel engines as well as the MD2010 marine engine. Fitting the correct bracket keeps mounted equipment correctly located and prevents load being transferred into hoses, wiring or component housings.

🚤 Compatibility

• Engine Family: D, TD, TAD, MD
• HP Range: Approximately 121-300 HP
• Year Range: Approximately 2000-2017

Full model list at the end of this description.

⚙️ Key Features

• OEM Volvo Penta part number 11700367
• System group: Engine
• Net weight: 0.48 kg
• Fits D5A, D7A, D7C, TD520/TD720, TAD520-TAD733 and MD2010 series diesel engines
• Supplied as an individual bracket, not part of a kit
• Engine type: Volvo Penta pushrod-operated turbo-diesel

🔌 Function

The bracket provides a rigid mounting point that secures an engine-mounted component or ancillary in its correct position relative to the engine. It carries the component's weight and resists engine vibration so that connected hoses, cables and fasteners are not loaded.

⚠️ Common Signs of Failure

• Visible cracking or fracturing around bolt holes or bend radii
• Bent or distorted bracket allowing the mounted component to sit out of alignment
• Repeated loosening or shearing of mounting bolts due to a worn or elongated hole
• Excessive vibration, rattling or knocking from the mounted component
• Corrosion, pitting or scaling that has reduced the bracket's section thickness

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 11700368 related intermediate rocker support
• 11700369 related end / bearing support
• 11700370 related rocker arm
• 955305 related mounting screw

Other-Brand OEM Numbers

• VOE11700367

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta D7A-B TA, D7A-T, D7A-TA, D7C-B TA, D7C-TA
• Volvo Penta D5A-B TA, D5A-T, D5A-TA
• Volvo Penta MD2010, MD2010B
• Volvo Penta TAD520GE, TAD520VE
• Volvo Penta TAD530GE MECH, TAD530GE EDC4
• Volvo Penta TAD531GE MECH, TAD531GE EDC4
• Volvo Penta TAD720GE, TAD720VE
• Volvo Penta TAD721GE, TAD721VE
• Volvo Penta TAD722GE, TAD722VE
• Volvo Penta TAD730GE MECH, TAD730GE EDC4
• Volvo Penta TAD731GE MECH, TAD731GE EDC4
• Volvo Penta TD520GE, TD520VE
• Volvo Penta TD720GE, TD720VE PP
• Volvo Penta TAD532GE EDC4
• Volvo Penta TAD550GE
• Volvo Penta TAD551GE
• Volvo Penta TAD732GE EDC4
• Volvo Penta TAD733GE EDC4