11700450 Shim | Genuine Volvo Penta Part

🔧 Product Description

This is a genuine Volvo Penta shim from the fuel system group, supplied in the 1.58 mm thickness. Shims of this type are used to set precise clearance or calibrated height within fuel system assemblies, so the correct thickness must be selected for the application. It is listed for TAD520VE and TAD720VE industrial diesel engines.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD720VE
• Volvo Penta TAD520VE

• Engine Family: TAD
• HP Range: Approximately 160-300 HP
• Year Range: Engine family introduced from 2001; final fitment is controlled by engine model, specification number, injector number and measured calibration requirement

⚙️ Key Features

• OEM Volvo Penta part number 11700450
• Thickness: 1.58 mm (TH=1,58mm)
• System group: Fuel System
• Net weight: 0.001 kg
• Fits TAD520VE and TAD720VE series diesel engines
• Thickness-specific component - confirm the required shim size before ordering
• Engine type: Volvo Penta 4-cylinder and 6-cylinder turbocharged, direct-injected industrial diesel with individual unit pumps and mechanical injectors

🔌 Function

The shim acts as a precision spacer that sets or corrects clearance and seating height within the fuel system assembly. Selecting the correct thickness ensures components are aligned and preloaded to specification.

⚠️ Common Signs of Failure

• Incorrect clearance or adjustment values measured during service
• Visible wear, scoring or deformation of the shim face
• Fuel leakage or inconsistent fuel delivery traced to poor component seating
• Rough running or hard starting after a fuel system component has been disturbed or replaced
• Shim lost or damaged during disassembly and requiring replacement on reassembly

🛠️ Service Notes

• Shims are supplied in graded thicknesses and exist to bring a setting into specification, so measure with a micrometer and select the thickness the setting procedure for your engine calls for rather than matching one by eye
• Note which shim came from which position on removal and keep them identified — once an assembly has bedded in, shims are not interchangeable between positions
• Check both faces are clean, flat and free of burrs, corrosion and old sealant before fitting; dirt trapped under a shim shifts the setting as surely as the wrong thickness does
• Discard any shim that is dished, cracked, pitted or fretted rather than reusing it, and make sure no old shim has been left behind in the recess
• Recheck the clearance or setting after the assembly is tightened down, because clamping load can change the measurement you took loose

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 20451317 complete Volvo Penta injector
• 20405851 injector nozzle
• 20405523 injector compression spring
• 20405525 injector adjusting screw
• 11700430 injector spacer
• 11700432 injector fitting nut

Other-Brand OEM Numbers

• VOE11700450
• ZM 2901196
• Bosch: 0 432 191 379 complete injector
• Bosch: DLLA158P730 injector nozzle
• Deutz: 0211 2645 complete injector
• Zettelmeyer / Volvo CE Legacy: ZM 2901196
• Bosch Diesel Service: calibrated 1.58 mm injector-pressure shim for Bosch injector 0 432 191 379 / nozzle DLLA158P730, subject to matching the original outside diameter, inside diameter and profile
• Deutz Service Application: BF6M1013CP injector 0211 2645 / nozzle 0211 1698, using an exact 1.58 mm shim with matching dimensions

OEM Reman Alternatives

• 3803652 Volvo Penta remanufactured injector

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging