11702289 Overhaul Kit | Genuine Volvo Penta Part
11702289 Overhaul Kit | Genuine Volvo Penta Part
Couldn't load pickup availability
Available on request — contact us
As an authorised Volvo Penta dealer we can source parts through channels not shown online, and check supersession and used options for you
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
This is a genuine Volvo Penta overhaul kit from the Engine group, supplied as the service kit for component 11030633 and containing the wear parts needed to recondition that unit rather than replace it outright. It is specified for the TD, TID, TWD and TAD 61/71 and 610/630/640/730/740 series marine and industrial diesel engines. Net weight is approximately 2.13 kg.
🚤 Compatibility
- Engine Family: TWD, TID, TD, TAD
- Year Range: Approximately 1980s-2000s
Full model list at the end of this description.
⚙️ Key Features
- OEM Volvo Penta part number 11702289
- Overhaul kit intended for use on component 11030633
- System group: Engine
- Net weight approximately 2.13 kg
- Fits TD, TID, TWD and TAD 61, 71, 610, 630, 640, 730 and 740 series diesel engines
- Supplied as a complete kit of service and wear components
- Engine type: Volvo inline six-cylinder industrial diesel
📋 Kit Contents
- 1 x Driving oil-pump gear and shaft assembly - no separate Volvo service number; supplied only within kit 11702289
- 1 x Driven oil-pump gear and shaft assembly - no separate Volvo service number; supplied only within kit 11702289
- 6 x Internal oil-pump bearing sleeves / shaft bushes - no separate Volvo service number; supplied only within kit 11702289
- 1 x Oil-pump thrust washer / spacer ring - no separate Volvo service number; supplied only within kit 11702289
- 1 x Woodruff key - Volvo Penta 910115
- The complete oil-pump housing 11030633 / 4772128, mounting bracket 471571, external bushing 470347, guide sleeve 401146, idler gear 471942, bearing sleeve 420048 and mounting gasket 947624 are separately serviced and are not included.
🔌 Function
The kit provides the replacement seals, gaskets and wear components required to overhaul and reseal the assembly it serves, restoring correct sealing and operating tolerances. Using a matched kit ensures all consumable parts disturbed during the rebuild are renewed together.
⚠️ Common Signs of Failure
- Oil, coolant or fuel seepage from the assembly's joints and seals
- Loss of operating pressure or reduced performance from the unit being serviced
- Audible knocking, rattling or unusual noise indicating internal wear
- Visible scoring, corrosion or hardened and cracked seals found on inspection
- Repeated need for topping up fluids between service intervals
🛠️ Service Notes
- Lay the kit out against the assembly before you start, so you can confirm it matches the unit you are working on and that nothing is missing
- Use everything the kit supplies — the point of an overhaul kit is that every wearing seal and gasket is renewed at once, and leaving one original seal in place is the usual cause of a repeat failure
- Work clean: these kits go into fuel, oil, cooling and hydraulic units where a single piece of grit will ruin the job, so clean the outside of the unit and cap open ports before opening it up
- Inspect what the kit does not replace — bores, sealing faces, shafts and threads — because a kit cannot make up for a worn or scored housing
- Follow the assembly sequence and the tightening figures in the workshop manual for your engine, and note that some kits include fasteners intended for single use
🔄 Supersession & Cross Reference
OEM Supersession Chain
- Services oil pump 11030633
OEM / Related Numbers
- 11030633 complete oil-pump assembly
- 4772128 earlier related oil-pump assembly
- 910115 included Woodruff key
- 471571 separately serviced mounting bracket
- 470347 separately serviced bushing
- 401146 separately serviced guide sleeve
- 471942 separately serviced idler gear
- 420048 separately serviced bearing sleeve
- 947624 separately serviced oil-pump gasket
Aftermarket / Verified Equivalents
- SLP: OPK-289
- Maxzz: OPK-289
- Kacmazlar: K01.0378
- Jader Parts: OPK-289
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
🔎 Full Model Compatibility
Typically suits:
- Volvo Penta TD61A, TD61ACE, TD61AG, TD61AGP, TD61AP, TD61APB, TD61AW
- Volvo Penta TD71A, TD71ACE, TD71AG, TD71AGP, TD71AP, TD71APB, TD71AW
- Volvo Penta TID71A, TID71AG, TID71AGP, TID71AP, TID71APB
- Volvo Penta TD610M, TD610V
- Volvo Penta TD630ME, TD630VE
- Volvo Penta TD730ME, TD730VE
- Volvo Penta TID61AG, TID61AGP
- Volvo Penta TWD630ME, TWD630VE
- Volvo Penta TAD730V
- Volvo Penta TD640VE
- Volvo Penta TWD610V
- Volvo Penta TWD710V
- Volvo Penta TWD730ME
- Volvo Penta TWD731VE
- Volvo Penta TWD740VE
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
