11705722 Shim | Genuine Volvo Penta Part

🔧 Product Description

This is a genuine Volvo Penta shim for the fuel system, supplied in the 1.20 mm thickness. It is used to set and correct clearance or calibration within the fuel injection pump assembly, where the exact shim thickness determines the resulting adjustment. This item supersedes the earlier adjusting washer 243471 and shares its 1.20 mm dimension, so confirm the required thickness for your application before ordering.

🚤 Compatibility

• Engine Family: TAMD, AD, TMD, KAD, KAMD
• HP Range: Approximately 7.5-300 HP
• Year Range: Approximately mid-1970s - 2005

Full model list at the end of this description.

⚙️ Key Features

• OEM Volvo Penta part number 11705722
• Thickness: 1.20 mm - this dimension distinguishes it from other shims in the same series
• System group: Fuel System
• Supersedes previous part number 243471 (adjusting washer)
• Fits 2001, 2002 and 2003 series, AD31, AD41, TMD31, TAMD31, TAMD41, TAMD42, KAD42, KAD43, KAMD42 and KAMD43 marine engines
• Engine type: Volvo Penta mechanically injected marine diesel

🔌 Function

The shim acts as a precision spacer that sets clearance or adjusts calibration within the fuel injection system. Its exact thickness determines the final setting, so the correct dimension must be selected during assembly or adjustment.

⚠️ Common Signs of Failure

• Injection timing or pump calibration drifting out of specification
• Hard starting, rough running or uneven fuel delivery after fuel system work
• Visible wear, scoring or deformation of the shim face
• Fuel weepage or leakage at the joint the shim seats against
• Incorrect clearance measured during service inspection, requiring a different thickness

🛠️ Service Notes

• Shims are supplied in graded thicknesses and exist to bring a setting into specification, so measure with a micrometer and select the thickness the setting procedure for your engine calls for rather than matching one by eye
• Note which shim came from which position on removal and keep them identified — once an assembly has bedded in, shims are not interchangeable between positions
• Check both faces are clean, flat and free of burrs, corrosion and old sealant before fitting; dirt trapped under a shim shifts the setting as surely as the wrong thickness does
• Discard any shim that is dished, cracked, pitted or fretted rather than reusing it, and make sure no old shim has been left behind in the recess
• Recheck the clearance or setting after the assembly is tightened down, because clamping load can change the measurement you took loose

🔄 Supersession & Cross Reference

OEM Supersession Chain

• 11705722 → Supersedes 243471

OEM / Related Numbers

• 243471 earlier number superseded by this part

Other-Brand OEM Numbers

• Bosch: 2 430 102 120
• Case IH: 1806239C1
• Cummins: 3905162
• Renault: 5001846659
• Iveco: 9972071

Aftermarket / Verified Equivalents

• Magirus-Deutz: 01319987
• Magirus-Deutz: 01319988

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta 2003, 2003R, 2003R SOLAS, 2001AG, 2001B, 2001D, 2003D, 2002AG, 2002B, 2002D, 2003B, 2003B SOLAS, 2003 SOLAS, 2001, 2002, 2001R
• Volvo Penta TAMD31L-A, TAMD31M, TAMD31M-A, TAMD31P, TAMD31P-A, TAMD31S, TAMD31D
• Volvo Penta AD31D, AD31D-A, AD31L-A, AD31P-A, AD31XD
• Volvo Penta AD41D, AD41L-A, AD41P-A
• Volvo Penta KAD42B, KAD42P-A
• Volvo Penta KAMD42B, KAMD42P-A
• Volvo Penta TAMD41H-A, TAMD41P-A
• Volvo Penta KAD43P-A
• Volvo Penta KAMD43P-A
• Volvo Penta TAMD42WJ-A
• Volvo Penta TMD31D