13200-91D21 Aftermarket Suzuki Carburetor for DT9.9 & DT15 (2001-2004) | Sawley's Select Marine Parts

🔧 Product Description

Aftermarket Suzuki carburettor assembly - Replacement Part Number: 13200-91D21

A complete replacement carburettor for Suzuki DT9.9 and DT15 carburetted two-stroke outboards. This assembly covers the later K1-K4 applications from 2001-2004 and the earlier DT9.9K and DT15 model-code families from 1986-2000 when the original carburettor number matches one of the references below. Correct carburettor calibration is critical on these engines, so the original part number, model code and year should be checked before installation.

⚙️ Key Features

• Complete aftermarket carburettor assembly

• Calibrated for Suzuki 9.9HP and 15HP two-stroke outboards

• Direct replacement for the listed Suzuki OEM carburettor numbers

• Restores correct fuel metering, starting, idle quality and throttle response

• Suitable for replacement of worn, corroded, blocked or fuel-leaking carburettors

🔄 Supersession & Cross Reference

OEM Supersession Chain:

• 13200-91D21 → Current replacement for 13200-91D20

• 13200-91D21 → Current replacement for 13200-93991

• 13200-93991 → Supersedes 13200-93902

OEM / Related Numbers:

• 13200-91D21

• 13200-91D22

• 13200-91D20

• 13200-91D02

• 13200-91D01

• 13200-93991

• 13200-93990

• 13200-93902

• 13200-93901

• 13200-93900

Aftermarket / Verified Equivalents:

• Recmar: REC13200-91D21

• Azure Parts: 13200-91D21

🚤 Compatibility

Commonly used on:

• Suzuki DT-series carburetted two-stroke outboards

Typically suits:

• Engine models:

• DT9.9 K1, K2, K3 and K4

• DT15 K1, K2, K3 and K4

• DT9.9K model-code applications

• DT15 KG through Y model-code applications

• HP Range: 9.9HP - 15HP

• Engine Type: Carburetted two-stroke outboard

• Year Range: Approximately 1986 - 2004

• Primary later fitment: DT9.9 and DT15, 2001 - 2004

🔌 Function

The carburettor meters fuel and air in the correct ratio for starting, idling, acceleration and full-throttle operation. Internal jets, passages, the float system and throttle circuit must remain clean and correctly calibrated for the engine to run reliably.

Common signs of failure:

• Hard starting or excessive choke required

• Rough, unstable or excessively high idle

• Hesitation, flat spots or stalling during acceleration

• Lean surging, backfiring or fuel starvation

• Rich running, smoke, plug fouling or excessive fuel use

• Fuel leakage or flooding from a worn needle, seat or float system

📦 Condition

• Brand new aftermarket replacement part

• New and unused

• Supplied in manufacturer or equivalent protective packaging