14212058 Hose Clamp | Genuine Volvo Penta Part

🔧 Product Description

A genuine Volvo mini-pattern hose clamp for small-bore fuel, coolant, air and heater hoses. The clamp has a nominal 11mm diameter, an approximately 9mm-wide band and a compact six-point socket tightening screw.

⚙️ Key Features

• Genuine Volvo OEM mini hose clamp
• Correct part number 14212058
• Nominal clamp diameter: 11mm
• Approximate band width: 9mm
• Steel construction with aluminium-zinc corrosion-protective coating

🔌 Function

The clamp compresses a small hose evenly around its nipple or pipe. Its compact body provides secure sealing where a full-size worm-drive clamp would be too large.

⚠️ Common Signs of Failure

• Fluid or air leaking from the hose joint
• Clamp screw seized or stripped
• Band cracked or heavily corroded
• Hose cut by overtightening
• Clamp outside its correct diameter range

🛠️ Service Notes

• Match the clamp to the hose outside diameter so the band closes well within its working range rather than at the very end of its travel
• Position it over the spigot behind the bead or barb, with the screw where a driver or spanner can still reach it once everything is refitted
• Tighten to seal, not to crush — an over-tightened worm-drive clamp cuts into soft hose and starts the leak you were trying to stop
• Renew clamps when a hose is changed rather than reusing them, and keep band, housing and screw all marine-grade stainless so the clamp does not corrode against itself
• Where two clamps are fitted to one connection, stagger the screw heads and recheck both after the first running period

🔄 Supersession & Cross Reference

Aftermarket / Verified Equivalents

• SLP: HCL-058

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging