14801-C 14801A1 Mercruiser Exhaust Elbow Each (per one item) | Genuine Used Part

🔧 Product Description

Genuine MerCruiser V8 Three-Inch Intermediate Exhaust Elbow - Part Number: 14801A1

A genuine used MerCruiser intermediate exhaust elbow for selected GM 5.0-litre, 5.7-litre and 6.2-litre V8 petrol sterndrive engines equipped with raised exhaust risers.

The cast elbow fits between the upper riser or spacer arrangement and the lower exhaust hose or Y-pipe. It is used with selected three-inch and six-inch riser-extension installations where additional exhaust height is required.

Part number 14801A1 normally identifies the OEM elbow installation kit. This listing is for one individual cast elbow identified by casting reference 14801-C, not a complete paired kit unless specifically stated.

⚙️ Key Features

• Genuine used MerCruiser intermediate elbow
• OEM kit reference 14801A1
• Individual casting reference 14801-C
• Used with three-inch and six-inch riser kits
• Suitable for selected small-block V8 exhaust systems

🚤 Compatibility

Commonly used on

• MerCruiser V8 wet-joint centre-rise exhaust systems
• Engines equipped with three-inch or six-inch riser spacer kits
• Raised exhaust installations requiring additional discharge height

Typically suits

• Engine models:
• MerCruiser 5.0L 305 CID V8
• MerCruiser 5.0LX
• MerCruiser 5.0L EFI
• MerCruiser 5.0L MPI
• MerCruiser 5.7L 350 CID V8
• MerCruiser 5.7LX
• MerCruiser 350 MAG
• MerCruiser 350 MAG MPI
• MerCruiser 5.7L EFI
• MerCruiser 5.7L MPI Horizon
• MerCruiser MX 6.2L MPI
• MerCruiser 377 MAG and 383 applications using the compatible wet-joint riser system
• Alpha and Bravo sterndrive packages using three-inch or six-inch riser extensions
• Engine Type: GM-based MerCruiser V8 petrol sterndrive
• Engine Capacity: Approximately 5.0L - 6.2L
• Riser Configuration: Three-inch and six-inch extension systems
• Year Range: Primarily late 1990s through early 2000s, dependent on exhaust-manifold configuration

🔌 Function

The intermediate elbow redirects the cooled exhaust flow from the raised riser downward into the exhaust hose and Y-pipe while maintaining the required height above the boat's waterline.

⚠️ Common Signs of Failure

• Internal rust restricts exhaust or cooling-water flow
• Elbow casting is cracked
• Water leaks from the elbow joint
• Mounting faces are corroded or uneven
• Exhaust fumes enter the engine compartment
• Cooling water enters the cylinders through a failed elbow
• Hose outlet is heavily corroded
• Engine overheats or loses power because of an exhaust restriction

🔄 Supersession & Cross Reference

OEM Supersession Chain

• 14801A1 MerCruiser intermediate-elbow installation kit
• 14801-C individual casting identification
• 61811A4 related replacement elbow-kit reference
• 61811A3 earlier related elbow-kit reference

OEM / Related Numbers

• 14801A1
• 710-14801A1
• 14801-C
• 14801A
• 61811A4
• 61811A3
• 11086T related port exhaust elbow used without riser extensions
• 14343T related starboard exhaust elbow used without riser extensions
• 44348T related standard exhaust tube
• 14358T related raised exhaust tube
• 807166A1 related exhaust water shutter

Aftermarket / Verified Equivalents

• Recmar: RM14801A1 - intermediate riser-elbow kit
• Barr Marine: BAMC20-61811A4 - three-inch intermediate elbow kit
• Barr Marine: MC20-61811A4 - replacement for 14801A1 and 61811A4
• Aftermarket 76mm V8 riser-extension elbow sold under 14801A1

📦 Condition

• Genuine used part
• Supplied and priced per one individual cast elbow
• Mounting hardware and the second elbow are included only where shown or stated
• Removed from running engine where applicable
• In good working condition unless otherwise stated