15032706 Oil Strainer | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta oil strainer from the lubricating and oil system group, serving the D13 marine and TAD13 industrial engine families. It sits within the engine's oil circuit to trap debris and larger contaminants before oil reaches the pump and downstream lubrication galleries. Supplied as a single component with a net weight of approximately 1.04 kg.

🚤 Compatibility

• Engine Family: D, TAD

Full model list at the end of this description.

⚙️ Key Features

• OEM Volvo Penta part number 15032706
• System group: Lubricating and Oil System
• Net weight approximately 1.04 kg
• Fits D13 marine and TAD13 series industrial and genset engines
• Engine type: Volvo Penta 13-litre inline six-cylinder diesel
• System type: Engine-oil pump suction filtration

🔌 Function

The oil strainer provides coarse filtration at the oil pickup stage, keeping sludge, carbon and metallic debris out of the oil pump and lubrication circuit. This protects bearings, journals and oil galleries from abrasive wear and blockage.

⚠️ Common Signs of Failure

• Low or fluctuating oil pressure caused by a clogged or restricted strainer mesh
• Visible sludge, carbon build-up or metal particles trapped in the screen at service
• Damaged, torn or collapsed mesh allowing debris to pass into the oil pump
• Oil pressure warning at idle or when the engine reaches full operating temperature
• Noisy lubrication or bearing wear symptoms indicating restricted oil flow

🛠️ Service Notes

• Clean or renew the strainer whenever the sump is off, washing it through with clean solvent rather than poking at it — a damaged mesh passes debris straight to the pump
• Look at what the old strainer has caught before you discard it; metal or bearing material means the real cause has not been found yet
• Fit new gaskets, seals or sealing washers on the suction pipe joints, as an air leak on the suction side loses oil pressure even with a sound pump
• Set the strainer at the position and orientation the manual specifies, clear of the sump floor and any baffle plate
• Prime the system and confirm oil pressure builds properly before putting any load on the engine

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 22303327 related aluminium oil pans
• 22303330 related aluminium oil pans
• 21876770 pressure pipe
• 21293367 sealing strip
• 20824906 oil pump

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta D13C3-B MH, D13C1-B MH, D13C4-B MH, D13B-E MG, D13B-E MG (FE), D13B-E MH, D13B-E MH (FE), D13B-F MG, D13B-F MG (FE), D13B-N MH, D13B-N MH (FE), D13C1-A MH, D13C2-A MH, D13C2-A MG, D13C1-A MG
• Volvo Penta TAD1341-43GE-B, TAD1341VE, TAD1341GE
• Volvo Penta TAD1344-45GE-B, TAD1344VE, TAD1344GE
• Volvo Penta TAD1342VE, TAD1342GE
• Volvo Penta TAD1343VE, TAD1343GE
• Volvo Penta TAD1345GE, TAD1345VE
• Volvo Penta TAD1350GE, TAD1350VE
• Volvo Penta TAD1351GE, TAD1351-53VE
• Volvo Penta TAD1340VE
• Volvo Penta TAD1346GE
• Volvo Penta TAD1352GE
• Volvo Penta TAD1353GE
• Volvo Penta TAD1354GE
• Volvo Penta TAD1355GE
• Volvo Penta TAD1360-62VE
• Volvo Penta TAD1363-65VE
• Volvo Penta TAD1371-75VE
• Volvo Penta TAD1380-82GE
• Volvo Penta TAD1381-85VE
• Volvo Penta TAD1384-85VE-IWP