15034005 Bracket | Genuine Volvo Penta Part

🔧 Product Description

This is a genuine Volvo Penta fuel system bracket, part number 15034005, used to mount and support fuel system components on the TAD13-series industrial and generator-set diesel engines. It serves as the fixed support point that holds fuel lines, filters or related hardware in their correct position relative to the engine. The bracket has a net weight of approximately 1.84 kg.

🚤 Compatibility

• Engine Family: TAD

Full model list at the end of this description.

⚙️ Key Features

• OEM Volvo Penta part number 15034005
• System group: Fuel System
• Net weight approximately 1.84 kg
• Fits TAD1340, TAD1350, TAD1360, TAD1370 and TAD1380 series GE, VE and IWP industrial and generator-set diesel engines
• Supplied as an individual bracket, not a kit
• Engine type: Volvo Penta 13-litre inline six-cylinder industrial diesel
• System type: Fuel hose, rising pipe and overflow-valve support

🔌 Function

The bracket provides a rigid mounting point that secures fuel system components to the engine and maintains correct component alignment and clearance. By holding fuel lines and related hardware steady, it prevents movement and vibration-induced stress in service.

⚠️ Common Signs of Failure

• Cracks or fractures at mounting holes or bend radii
• Corrosion or pitting that weakens the bracket body
• Loose, stripped or elongated fastener holes allowing component movement
• Bent or distorted bracket causing misalignment or strain on fuel lines
• Chafing, rubbing or leaks at fuel lines caused by an unsupported or failed bracket

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 21374137 related fuel hose
• 21354197 related fuel hose
• 23112046 related later fuel hose
• 21775773 rising pipe
• 21088049 overflow valve
• 949747 related hose clamps
• 974582 related hose clamps

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta TAD1341-43GE-B, TAD1341VE, TAD1341GE
• Volvo Penta TAD1344-45GE-B, TAD1344VE, TAD1344GE
• Volvo Penta TAD1342VE, TAD1342GE
• Volvo Penta TAD1343VE, TAD1343GE
• Volvo Penta TAD1345GE, TAD1345VE
• Volvo Penta TAD1350GE, TAD1350VE
• Volvo Penta TAD1351GE, TAD1351-53VE
• Volvo Penta TAD1340VE
• Volvo Penta TAD1346GE
• Volvo Penta TAD1352GE
• Volvo Penta TAD1353GE
• Volvo Penta TAD1354GE
• Volvo Penta TAD1355GE
• Volvo Penta TAD1360-62VE
• Volvo Penta TAD1363-65VE
• Volvo Penta TAD1371-75VE
• Volvo Penta TAD1380-82GE
• Volvo Penta TAD1381-85VE
• Volvo Penta TAD1384-85VE-IWP