1542214 Gear | Genuine Volvo Penta Part

🔧 Product Description

A genuine Volvo Penta drive gear used inside engine oil pump assembly 860721. The gear receives mechanical drive from the engine timing system and rotates the oil-pump wheel to circulate lubricant through the engine. The assembly uses woodruff key 910115, oil-pump wheel 1542215 and bearing sleeve 1542218. Gear tooth condition, shaft fit and pump clearances should be inspected together.

🚤 Compatibility

• Engine Family: MD, TMD, AD, TAMD, AQAD, D, TD, AQD, KAD, KAMD
• HP Range: Approximately 90-300 HP
• Year Range: Approximately 1970s - 2000s

Full model list at the end of this description.

⚙️ Key Features

• OEM Volvo Penta part number 1542214
• System group: Lubricating and Oil System
• Net weight: 0.45 kg
• Fits MD, TMD, TAMD, TD, AD, AQAD, D, KAD and KAMD 30-45 series marine diesel engines
• Genuine Volvo Penta component built to original specification
• Engine type: Volvo Penta 4- and 6-cylinder marine diesel lubrication system

🔌 Function

The gear meshes within the engine oil pump drive to convert engine rotation into pump action, maintaining oil pressure and flow. Correct gear condition and tooth clearance are essential for consistent lubrication of bearings and moving components.

⚠️ Common Signs of Failure

• Low or fluctuating oil pressure at idle and under load
• Whining, growling or rattling noise from the front of the engine or pump area
• Visible tooth wear, chipping or pitting on the gear faces
• Excessive backlash or play between meshing gears
• Metal particles or fine debris found in the oil filter or sump

🛠️ Service Notes

• Inspect the mating gear as well as the one being renewed; a chipped or worn tooth on the partner will quickly ruin a new gear, so change them as a pair where the wear is shared
• Check the shaft, bush or bearing the gear runs on for wear and scoring before assembly and renew anything that is not to size
• Fit the gear square and press it home rather than driving it with hammer blows, which spread the bore and mark the teeth
• Oil the teeth and bearing surfaces on assembly so the gear is not run up dry on first start
• Where the workshop manual for your engine gives backlash, end float or timing settings for the gear, set and check them to those figures rather than by feel

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 860721 related complete oil pump
• 910115 related woodruff key
• 1542215 related oil-pump wheel
• 1542218 related bearing sleeve

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta AD31, AD31B, AD31D-A, AD31L-A, AD31P-A, AD31XD
• Volvo Penta TAMD41B, TAMD41H-A, TAMD41H-B, TAMD41P-A, TAMD41P, TAMD41A
• Volvo Penta AD41B, AD41D, AD41A, AD41BJ
• Volvo Penta KAD42A, KAD42B, KAD42P-A
• Volvo Penta KAD44P, KAD44P-B, KAD44P-C
• Volvo Penta KAMD42A, KAMD42B, KAMD42P-A
• Volvo Penta KAMD43P, KAMD43P-A, KAMD43P-B
• Volvo Penta KAMD44P-B, KAMD44P-C, KAMD44P-A
• Volvo Penta TMD40A, TMD40B, TMD40C
• Volvo Penta TMD41A, TMD41B, TMD41L-A
• Volvo Penta AQAD40B, AQAD40A
• Volvo Penta D41B, D41D
• Volvo Penta D45BPP, D45A
• Volvo Penta KAD43P-B, KAD43P-A
• Volvo Penta TAMD31A, TAMD31B
• Volvo Penta TAMD40A, TAMD40B
• Volvo Penta TAMD42WJ-A, TAMD42B
• Volvo Penta TMD31A, TMD31B
• Volvo Penta AD30A
• Volvo Penta AD40B
• Volvo Penta AQAD30A
• Volvo Penta AQD40A
• Volvo Penta KAD300-A
• Volvo Penta KAD32P
• Volvo Penta KAMD300-A
• Volvo Penta MD30A
• Volvo Penta MD31A
• Volvo Penta MD40A
• Volvo Penta TAMD30A
• Volvo Penta TD30A
• Volvo Penta TD31ACE
• Volvo Penta TD40A
• Volvo Penta TD45B
• Volvo Penta TMD30A