1544733 Hose Clamp | Genuine Volvo Penta Part
1544733 Hose Clamp | Genuine Volvo Penta Part
Couldn't load pickup availability
In stock — Australian warehouse
Typically reaches our store in 3–5 business days
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
This is a genuine Volvo Penta hose clamp with a 106 mm clamping diameter, listed under the fastening, spacing, locking and support hardware group. It secures flexible hoses and ducting to their mating connections so the joint stays sealed and mechanically retained under vibration and pressure. The 106 mm size is what sets this clamp apart from otherwise similar clamps, so check the hose outside diameter before ordering.
🚤 Compatibility
- Engine Family: TAD, TD, D, TWD, TID, THD, DH
Full model list at the end of this description.
⚙️ Key Features
- OEM Volvo Penta part number 1544733
- Clamping diameter: D=106mm
- System group: Parts for Fastening, Spacing, Locking and Support, Stock Shape Materials
- Net weight: 0.098 kg
- Replaces superseded part number 3825134
- Fits Volvo Penta D11 and D13 marine engines plus TD, TID, THD, TWD and TAD industrial and genset series
- Two of these clamps, together with hose 3126646, form the replacement for the discontinued hose connection 3825134
- Engine type: Volvo Penta 10- and 12-litre diesel
- Quantity varies by assembly, most commonly one
🔌 Function
A hose clamp compresses a flexible hose evenly around its mating spigot or pipe to form a leak-free, vibration-resistant joint. It maintains that clamping load throughout the engine's heat cycles so the hose cannot creep, weep or blow off under pressure.
⚠️ Common Signs of Failure
- Coolant, oil, fuel or air leaking at the hose joint
- Visible corrosion, pitting or rust staining on the clamp band
- Stripped, seized or rounded tightening screw that will not hold torque
- Hose slipping, ballooning or blowing off the connection under pressure
- Cracked or distorted band that no longer applies even clamping force
🛠️ Service Notes
- Match the clamp to the hose outside diameter so the band closes well within its working range rather than at the very end of its travel
- Position it over the spigot behind the bead or barb, with the screw where a driver or spanner can still reach it once everything is refitted
- Tighten to seal, not to crush — an over-tightened worm-drive clamp cuts into soft hose and starts the leak you were trying to stop
- Renew clamps when a hose is changed rather than reusing them, and keep band, housing and screw all marine-grade stainless so the clamp does not corrode against itself
- Where two clamps are fitted to one connection, stagger the screw heads and recheck both after the first running period
🔄 Supersession & Cross Reference
OEM Supersession Chain
- 1544733 → Supersedes 3825134
OEM / Related Numbers
- 3825134 earlier number superseded by this part
- 1544731 - alternative clamp in the DH10A assembly
- 1544732 - companion air-filter clamp
- 1544734 - companion air-filter clamp
- 1544449 - related filter insert
- 3825778 - related air filter
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
🔎 Full Model Compatibility
Typically suits:
- Volvo Penta D13C2-A MP, D13C4-A MP, D13B-A MP, D13B-H MP, D13B-G MP, D13B-L MP, D13B-E MG, D13B-E MG (FE), D13B-E MH, D13B-E MH (FE), D13B-F MG, D13B-F MG (FE), D13B-K MP, D13B-N MH, D13B-N MH (FE), D13B-C MP, D13C6-A MP, D13C1-A MH, D13C2-A MH, D13C5-A MP, D13C2-A MG, D13C1-A MG
- Volvo Penta TD61A, TD61ACE, TD61AG, TD61AGP, TD61AP, TD61APB, TD61AW
- Volvo Penta TD71A, TD71ACE, TD71AG, TD71AGP, TD71AP, TD71APB, TD71AW
- Volvo Penta D11A-A, D11A-B, D11A-C, D11A-E, D11A-D MP
- Volvo Penta TAD1030P, TAD1030G, TAD1030GE, TAD1030V, TAD1030VE
- Volvo Penta TID71A, TID71AG, TID71AGP, TID71AP, TID71APB
- Volvo Penta TID162AG, TID162AGP, TID162AP, TID162APB
- Volvo Penta TWD610G, TWD610P, TWD610PB, TWD610V
- Volvo Penta TWD710G, TWD710P, TWD710PB, TWD710V
- Volvo Penta TAD1341-43GE-B, TAD1341VE, TAD1341GE
- Volvo Penta TAD1344-45GE-B, TAD1344VE, TAD1344GE
- Volvo Penta TD610G, TD610M, TD610V
- Volvo Penta THD102KB, THD102KD, THD102K-KB
- Volvo Penta TWD1210G, TWD1210P, TWD1210V
- Volvo Penta TWD1211V, TWD1211P, TWD1211G
- Volvo Penta TWD1630G, TWD1630P, TWD1630V
- Volvo Penta TAD1342VE, TAD1342GE
- Volvo Penta TAD1343VE, TAD1343GE
- Volvo Penta TAD1345GE, TAD1345VE
- Volvo Penta TAD1350GE, TAD1350VE
- Volvo Penta TAD1351GE, TAD1351-53VE
- Volvo Penta TD121G-87, TD121GP
- Volvo Penta TD630ME, TD630VE
- Volvo Penta TD730ME, TD730VE
- Volvo Penta TID61AG, TID61AGP
- Volvo Penta TWD1230ME, TWD1230VE
- Volvo Penta TWD630ME, TWD630VE
- Volvo Penta TWD740GE, TWD740VE
- Volvo Penta DH10A
- Volvo Penta TAD1140-42VE
- Volvo Penta TAD1150-52VE
- Volvo Penta TAD1170-72VE
- Volvo Penta TAD1180-83VE
- Volvo Penta TAD1231GE
- Volvo Penta TAD1240GE
- Volvo Penta TAD1241GE
- Volvo Penta TAD1242GE
- Volvo Penta TAD1340VE
- Volvo Penta TAD1352GE
- Volvo Penta TAD1354GE
- Volvo Penta TAD1355GE
- Volvo Penta TAD1371-75VE
- Volvo Penta TAD1380-82GE
- Volvo Penta TAD1381-85VE
- Volvo Penta TAD1384-85VE-IWP
- Volvo Penta TAD740GE
- Volvo Penta TAD741GE
- Volvo Penta TD100G
- Volvo Penta TD1010G
- Volvo Penta TD1030VE
- Volvo Penta TD1210G
- Volvo Penta TD640VE
- Volvo Penta TD710G
- Volvo Penta TWD1030ME
- Volvo Penta TWD1031VE
- Volvo Penta TWD1620G
- Volvo Penta TWD730ME
- Volvo Penta TWD731VE
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
