1545011 Bracket | Genuine Volvo Penta Part

🔧 Product Description

This is the genuine Volvo Penta bracket from the lubricating and oil system group, used to support and locate oil system pipework and components on the engine. It is the late-type version, superseding the earlier 422178 oil pipe arrangement, so it is the correct current specification for repairs and rebuilds. Net weight is 0.303 kg.

🚤 Compatibility

• Engine Family: MD, TMD, AQ, TD, TWD, BB, TID, D, B, TAD, MB, AQD

Full model list at the end of this description.

⚙️ Key Features

• OEM Volvo Penta part number 1545011
• Late type - the current specification replacing the earlier design
• System group: Lubricating and Oil System
• Net weight: 0.303 kg
• Supersedes part number 422178 (early type)
• Fits MD100, TMD100, TMD102, TD100, TID100, TD1010/TD1030, TWD1010/TWD1030/TWD1031, TAD1030, AQ115/AQ130/AQ165/AQ170, BB115/BB165/BB170, B20/MB20, MD21 and D100 series engines
• Engine type: Volvo Penta 10-litre diesel

🔌 Function

The bracket secures and positions oil system pipework and related components against the engine, holding them in the correct alignment. This prevents movement and vibration fatigue at pipe connections, protecting the integrity of the lubrication circuit.

⚠️ Common Signs of Failure

• Cracking or fracture of the bracket body, often around fastener holes
• Corrosion or pitting that weakens the mounting points
• Loose, stretched or missing fasteners allowing the supported pipe to move
• Chafing, rubbing or wear marks on the pipe where support has been lost
• Oil weeping or leakage at pipe joints caused by unsupported vibration

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

🔄 Supersession & Cross Reference

OEM Supersession Chain

• 1545011 → Supersedes 422178

OEM / Related Numbers

• 422178 earlier number superseded by this part

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta TD100ARC, TD100G-85, TD100A, TD100AG, TD100CHC, TD100G, TD100GG, TD100GGP, TD100HP, TD100HPB, TD100GG-85, TD100GP, TD100GP-85, TD100CRC
• Volvo Penta TID100KG, TID100K, TID100K-87, TID100KGP-87, TID100KP, TID100KP-87, TID100KPB-87
• Volvo Penta AQ130C, AQ130D, AQ130A, AQ130B
• Volvo Penta AQ170B, AQ170C, AQ170A
• Volvo Penta BB115A, BB115B, BB115C
• Volvo Penta BB170B, BB170C, BB170A
• Volvo Penta MB20A, MB20B, MB20C
• Volvo Penta MD100A, MD100B, MD100B-CC
• Volvo Penta AQ115A, AQ115B
• Volvo Penta D100A, D100B
• Volvo Penta 100S, 110S
• Volvo Penta TAD1030V, TAD1030VE
• Volvo Penta TMD100A, TMD100C
• Volvo Penta AQ165A
• Volvo Penta AQD21A
• Volvo Penta B20
• Volvo Penta BB165A
• Volvo Penta MD21A
• Volvo Penta TD1010G
• Volvo Penta TD1030VE
• Volvo Penta TMD102A
• Volvo Penta TWD1010G
• Volvo Penta TWD1030ME
• Volvo Penta TWD1031VE