Skip to product information
1 of 1

1547934 Cover | Genuine Volvo Penta Part

1547934 Cover | Genuine Volvo Penta Part

Regular price $75.50 AUD
Regular price Sale price $75.50 AUD
Sale Sold out
Shipping calculated at checkout.
Quantity

In stock — Australian warehouse

Typically reaches our store in 3–5 business days

Availability checked daily with Volvo Penta

✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide

🔧 Product Description

This genuine Volvo Penta cover is a machined connection, housing or closure component used in the lubrication-system housing closure. It is manufactured to the original Volvo Penta dimensions and interface requirements so the adjoining component remains supported, located and sealed at the housing or closure. In service, it closes and protects the designated lubrication-system opening while retaining oil within the assembly. Fitment is controlled by the exact engine or product configuration and serialised parts list; confirm OEM number 1547934 against the installed assembly before ordering.

🚤 Compatibility

  • Engine Family: D, TAD, TWD

Full model list at the end of this description.

⚙️ Key Features

  • OEM Volvo Penta part number 1547934
  • System group: Engine
  • Net weight 0.068 kg
  • Fits D11, D12 and D13 marine engines plus TAD and TWD industrial and generator-set engines
  • Supplied as a genuine original-specification replacement part

🔌 Function

The cover seals or shields an opening or component position on the engine, preventing the ingress of dirt, water and foreign material. It also serves as a protective closure so the covered assembly remains clean and undisturbed in service.

⚠️ Common Signs of Failure

  • Cracks, splits or impact damage to the cover body
  • Distortion or warping that prevents the cover from seating flat
  • Seepage, weeping or leakage at the cover's sealing face
  • Loose, missing or corroded retaining fasteners allowing the cover to work free
  • Dirt, water or debris found inside the area the cover is intended to protect

🛠️ Service Notes

  • Clean both sealing faces back to clean metal and check the cover for distortion, cracks or pulled bolt holes before refitting — a warped flange will not seal even with a new gasket
  • Where the joint uses a gasket, seal or O-ring, always fit a new one and seat it dry unless the workshop manual for your engine specifies a sealant; never try to make a poor joint tight with extra sealant
  • Tighten the fasteners progressively and evenly, working out from the centre, to the figure given in the manual for your engine — pressed steel, alloy and plastic covers distort easily if pulled down hard or unevenly
  • If the cover carries a shaft seal or bearing, support it square to the shaft as it goes on so the seal lip is not nicked or rolled over
  • Check that any breather, drain or oil return passage in the cover is clear before final tightening, and look for leaks once the engine has been run up to temperature

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

  • Volvo Penta D13C3-B MH, D13C1-B MH, D13C4-B MH, D13C1-A MP, D13C2-A MP, D13C3-A MP, D13C4-A MP, D13B-A MP, D13B-H MP, D13B-G MP, D13B-L MP, D13B-E MG, D13B-E MG (FE), D13B-E MH, D13B-E MH (FE), D13B-F MG, D13B-F MG (FE), D13B-K MP, D13B-N MH, D13B-N MH (FE), D13B-B MP, D13B-D MP, D13B-J MP, D13B-M MP, D13B-C MP, D13C6-A MP, D13C1-A MH, D13C2-A MH, D13C5-A MP, D13C2-A MG, D13C1-A MG
  • Volvo Penta D12C-A MP, D12D-A MG, D12D-A MH, D12D-A MP, D12D-B MH, D12D-B MP, D12D-C MH, D12D-C MP, D12D-D MP, D12D-E MG, D12D-E MH, D12D-E MP, D12D-F MP, D12D-G MH, D12D-G MP, D12D-H MP
  • Volvo Penta D11C1-A MP, D11C3-A MP, D11C2-A MP, D11C4-A MP
  • Volvo Penta TAD1241GE, TAD1241VE, TAD1241-42VE
  • Volvo Penta TAD1341-43GE-B, TAD1341VE, TAD1341GE
  • Volvo Penta TAD1344-45GE-B, TAD1344VE, TAD1344GE
  • Volvo Penta TAD1242GE, TAD1242VE
  • Volvo Penta TAD1250VE, TAD1250-52VE
  • Volvo Penta TAD1342VE, TAD1342GE
  • Volvo Penta TAD1343VE, TAD1343GE
  • Volvo Penta TAD1345GE, TAD1345VE
  • Volvo Penta TAD1350GE, TAD1350VE
  • Volvo Penta TAD1351GE, TAD1351-53VE
  • Volvo Penta TAD1140-42VE
  • Volvo Penta TAD1150-52VE
  • Volvo Penta TAD1170-72VE
  • Volvo Penta TAD1180-83VE
  • Volvo Penta TAD1240GE
  • Volvo Penta TAD1251VE
  • Volvo Penta TAD1252VE
  • Volvo Penta TAD1340VE
  • Volvo Penta TAD1346GE
  • Volvo Penta TAD1352GE
  • Volvo Penta TAD1353GE
  • Volvo Penta TAD1354GE
  • Volvo Penta TAD1355GE
  • Volvo Penta TAD1360-62VE
  • Volvo Penta TAD1363-65VE
  • Volvo Penta TAD1371-75VE
  • Volvo Penta TAD1380-82GE
  • Volvo Penta TAD1381-85VE
  • Volvo Penta TAD1384-85VE-IWP
  • Volvo Penta TAD940VE
  • Volvo Penta TAD941VE
  • Volvo Penta TAD942VE
  • Volvo Penta TAD943VE
  • Volvo Penta TWD1240VE

Shipping & Delivery

Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details