1547969 Shim | Genuine Volvo Penta Part

🔧 Product Description

This genuine Volvo Penta shim is a selective-thickness valve-clearance adjustment component used in the exhaust-valve clearance adjustment. It is manufactured to the original Volvo Penta dimensions and interface requirements so the adjusted valve clearance can be set to the measured workshop specification. Precision adjustment shim, 2.10 mm thickness; commonly supplied within shim assortment 85111158. In service, it sets the exhaust-valve clearance by providing the selected calibrated thickness between the valve-train components. Fitment is controlled by the exact engine or product configuration and serialised parts list; confirm OEM number 1547969 against the installed assembly before ordering.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD1353GE
• Volvo Penta TAD1350GE
• Volvo Penta TAD1351GE
• Volvo Penta TAD1352GE
• Volvo Penta TAD1354GE
• Volvo Penta TAD1355GE
• Volvo Penta TAD1170-72VE
• Volvo Penta TAD1140-42VE

• Engine Family: TAD

⚙️ Key Features

• OEM Volvo Penta part number 1547969
• Thickness: 2.10 mm (TH=2.10mm)
• System group: Engine
• Net weight: 0.048 kg
• Fits TAD1350GE-TAD1355GE, TAD1140-42VE and TAD1170-72VE industrial and genset diesel engines
• Thickness-specific component - selected by measured clearance during assembly
• 6 used per assembly

🔌 Function

The shim acts as a precision spacer that adjusts the clearance or preload between two mating engine components to the specified value. Fitting the correct thickness ensures parts are located and loaded exactly as designed.

⚠️ Common Signs of Failure

• Measured clearance or endplay outside the specified tolerance at assembly
• Visible wear, scoring or polishing on the shim faces
• Distortion, cracking or deformation from overload or incorrect installation
• Abnormal noise, knocking or vibration traced to excessive component play
• Repeated component wear caused by an incorrect shim thickness previously fitted

🛠️ Service Notes

• Shims are supplied in graded thicknesses and exist to bring a setting into specification, so measure with a micrometer and select the thickness the setting procedure for your engine calls for rather than matching one by eye
• Note which shim came from which position on removal and keep them identified — once an assembly has bedded in, shims are not interchangeable between positions
• Check both faces are clean, flat and free of burrs, corrosion and old sealant before fitting; dirt trapped under a shim shifts the setting as surely as the wrong thickness does
• Discard any shim that is dished, cracked, pitted or fretted rather than reusing it, and make sure no old shim has been left behind in the recess
• Recheck the clearance or setting after the assembly is tightened down, because clamping load can change the measurement you took loose

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 85111158 related reference

Aftermarket / Verified Equivalents

• Vaden 1300 05 003

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging