• 1575983 Bracket | Genuine Volvo Penta Part
1 1

1575983 Bracket | Genuine Volvo Penta Part

1575983 Bracket | Genuine Volvo Penta Part

$234.07 AUD
$234.07 AUD
Sale Sold out
Shipping calculated at checkout.

Available from Volvo Penta international

Typically reaches our store in 10–14 business days

Availability checked daily with Volvo Penta

✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide

🔧 Product Description

This genuine Volvo Penta bracket is a structural fastening, locking or support component used in the engine support bracket installation. It is manufactured to the original Volvo Penta dimensions and interface requirements so the assembly retains its designed clamp load, support and alignment. In service, it supports and locates the matched engine component in the specified installation position. Fitment is controlled by the exact engine or product configuration and serialised parts list; confirm OEM number 1575983 against the installed assembly before ordering.

🚤 Compatibility

  • Engine Family: AQ, TAD, TD, TWD, TID, BB, B, D, MD, MB, AQD

Full model list at the end of this description.

⚙️ Key Features

  • OEM Volvo Penta part number 1575983
  • System group: Inlet and Exhaust System
  • Net weight: 1.24 kg
  • Replaces superseded part number 3828663
  • Fits AQ, BB, MB, MD, TD, TID, TWD and TAD series petrol and diesel engines
  • Quantity varies by assembly, most commonly one

🔌 Function

The bracket provides a fixed mounting point that locates and supports a component of the inlet and exhaust system relative to the engine. It holds the supported assembly in correct alignment and absorbs operating loads and vibration.

⚠️ Common Signs of Failure

  • Visible cracking or fracture around mounting holes or stress points
  • Corrosion, pitting or scaling that weakens the mounting surface
  • Elongated, worn or stripped fastener holes allowing movement
  • Rattling, knocking or excessive vibration from the supported component
  • Misalignment of the attached inlet or exhaust component, causing stress on joints or leaks

🛠️ Service Notes

  • Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
  • Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
  • Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
  • Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
  • On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

🔄 Supersession & Cross Reference

OEM Supersession Chain

  • 1575983 → Supersedes 3828663

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

  • Volvo Penta TID121KG, TID121KGP, TID121KP, TID121KPB, TID121L, TID121LG, TID121LGP, TID121LP, TID121LPB, TID121FG, TID121K, TID121K-87
  • Volvo Penta TD121G-87, TD121GGP-87, TD121G, TD121GG, TD121GGP, TD121GP, TD121GPB
  • Volvo Penta TD61A, TD61ACE, TD61AG, TD61AGP, TD61AP, TD61APB, TD61AW
  • Volvo Penta TD71A, TD71ACE, TD71AG, TD71AGP, TD71AP, TD71APB, TD71AW
  • Volvo Penta TD100G-85, TD100A, TD100G, TD100GG, TD100HP
  • Volvo Penta AQ130C, AQ130D, AQ130A, AQ130B
  • Volvo Penta TID71AG, TID71AGP, TID71AP, TID71APB
  • Volvo Penta TWD1210G, TWD1210P, TWD1210PB, TWD1210V
  • Volvo Penta TWD710G, TWD710P, TWD710PB, TWD710V
  • Volvo Penta AQ170B, AQ170C, AQ170A
  • Volvo Penta BB115A, BB115B, BB115C
  • Volvo Penta BB170B, BB170C, BB170A
  • Volvo Penta MB20A, MB20B, MB20C
  • Volvo Penta TAD730G, TAD730P, TAD730V
  • Volvo Penta TD120HP, TD120HPP, TD120GG
  • Volvo Penta TID100KGP, TID100K, TID100KP-87
  • Volvo Penta TWD1211V, TWD1211P, TWD1211G
  • Volvo Penta TWD610P, TWD610PB, TWD610V
  • Volvo Penta AQ115A, AQ115B
  • Volvo Penta 100S, 110S
  • Volvo Penta TAD1030P, TAD1030V
  • Volvo Penta TD60D-83, TD60B
  • Volvo Penta TD70G, TD70G-83
  • Volvo Penta TID120FPP, TID120HPP
  • Volvo Penta TID61AG, TID61AGP
  • Volvo Penta TWD740GE, TWD740VE
  • Volvo Penta AQ165A
  • Volvo Penta AQD21A
  • Volvo Penta B20
  • Volvo Penta BB165A
  • Volvo Penta D100B
  • Volvo Penta D70B
  • Volvo Penta MD21A
  • Volvo Penta TAD1230V
  • Volvo Penta TAD740GE
  • Volvo Penta TAD741GE
  • Volvo Penta TD1010G
  • Volvo Penta TD1210G
  • Volvo Penta TD520VE
  • Volvo Penta TD610V
  • Volvo Penta TD640VE
  • Volvo Penta TD720VE PP
  • Volvo Penta TID70GPP
  • Volvo Penta TWD1010G
  • Volvo Penta TWD1230VE
  • Volvo Penta TWD1231VE
  • Volvo Penta TWD630VE
  • Volvo Penta TWD731VE

Shipping & Delivery

Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details