1576517 Spacer Sleeve | Genuine Volvo Penta Part

🔧 Product Description

This genuine Volvo Penta spacer sleeve is a replaceable locating, spacing or bearing-support component used in the manual oil-bilge pump assembly. It is manufactured to the original Volvo Penta dimensions and interface requirements so the supported component retains the specified clearance, spacing and location. In service, it maintains the required spacing and alignment in the manual oil-bilge pump linkage or mounting assembly. Fitment is controlled by the exact engine or product configuration and serialised parts list; confirm OEM number 1576517 against the installed assembly before ordering.

🚤 Compatibility

• Engine Family: TAD, TD, TWD, TID, TAMD

Full model list at the end of this description.

⚙️ Key Features

• OEM Volvo Penta part number 1576517
• Genuine Volvo Penta spacer sleeve
• Net weight approximately 0.011 kg (11 g)
• Fits TD, TID, TAD, TAMD and TWD series diesel engines across marine, industrial and generator-set applications
• Supplied as an individual component
• 2 used per assembly

🔌 Function

A spacer sleeve maintains a fixed distance between two mating components in an assembly, ensuring correct alignment and preventing over-compression when fasteners are tightened. It transfers clamping load through the joint so the assembled parts sit at their designed spacing.

⚠️ Common Signs of Failure

• Visible wear, scoring or ovality on the sleeve bore or outer surface
• Crushed, deformed or shortened sleeve resulting in loss of correct component spacing
• Corrosion or pitting causing the sleeve to seize in place
• Looseness, rattling or misalignment of the components it separates
• Repeated loosening of the associated fasteners after tightening

🛠️ Service Notes

• A spacer sleeve sets a fixed length in the joint — never leave one out, shorten one, or substitute a stack of washers, or the clamping load and alignment will both be wrong
• Check that the sleeve is square and fully seated in its counterbore or recess before any fastener is tightened
• Discard a sleeve that is crushed, bell-mouthed, scored or corroded; a shortened sleeve lets the joint be over-clamped and the component distorted
• On sleeves in an oil circuit, make sure the bore is clear and that any seal running on the sleeve has a clean, unscored surface to work against
• Tighten the joint to the figure in the workshop manual for your engine, with the sleeve taking the clamping load rather than the component it protects

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta TD100G-85, TD100G, TD100GG, TD100GGP, TD100HP, TD100HPB, TD100GG-85, TD100GP, TD100GP-85
• Volvo Penta TID100KG, TID100KGP, TID100K, TID100K-87, TID100KGP-87, TID100KP, TID100KP-87, TID100KPB-87
• Volvo Penta TD61A, TD61ACE, TD61AG, TD61AGP, TD61AP, TD61APB, TD61AW
• Volvo Penta TD71A, TD71ACE, TD71AG, TD71AGP, TD71AP, TD71APB, TD71AW
• Volvo Penta TAD1030P, TAD1030G, TAD1030GE, TAD1030V, TAD1030VE
• Volvo Penta TID71A, TID71AG, TID71AGP, TID71AP, TID71APB
• Volvo Penta TD121G-87, TD121GGP-87, TD121GP, TD121GPB
• Volvo Penta TID162AG, TID162AGP, TID162AP, TID162APB
• Volvo Penta TWD1210G, TWD1210P, TWD1210PB, TWD1210V
• Volvo Penta TWD610G, TWD610P, TWD610PB, TWD610V
• Volvo Penta TWD710G, TWD710P, TWD710PB, TWD710V
• Volvo Penta TAD1630G, TAD1630GE, TAD1630P
• Volvo Penta TAD730G, TAD730P, TAD730V
• Volvo Penta TWD1211V, TWD1211P, TWD1211G
• Volvo Penta TWD1630G, TWD1630P, TWD1630V
• Volvo Penta TAD1031G, TAD1031GE
• Volvo Penta TAD1230G, TAD1230V
• Volvo Penta TAD1631GE, TAD1631G
• Volvo Penta TD610G, TD610V
• Volvo Penta TID121KGP, TID121K-87
• Volvo Penta TID61AG, TID61AGP
• Volvo Penta TWD1230ME, TWD1230VE
• Volvo Penta TAD1032GE
• Volvo Penta TAD1231GE
• Volvo Penta TAD1232GE
• Volvo Penta TAMD71B
• Volvo Penta TD1010G
• Volvo Penta TD1030VE
• Volvo Penta TD1210G
• Volvo Penta TD630VE
• Volvo Penta TD640VE
• Volvo Penta TD710G
• Volvo Penta TD730VE
• Volvo Penta TWD1010G
• Volvo Penta TWD1030ME
• Volvo Penta TWD1031VE
• Volvo Penta TWD1231VE
• Volvo Penta TWD1620G
• Volvo Penta TWD630VE
• Volvo Penta TWD731VE