1585449 Gasket | Genuine Volvo Penta Part

🔧 Product Description

This genuine Volvo Penta gasket is a formed OEM sealing component used in the legacy engine and sterndrive gasketed joint. It is manufactured to the original Volvo Penta dimensions and interface requirements so the mating joint retains its intended fluid, gas or contamination barrier. In service, it seals the specified mating joint on the listed legacy petrol and diesel marine engine applications. Fitment is controlled by the exact engine or product configuration and serialised parts list; confirm OEM number 1585449 against the installed assembly before ordering.

🚤 Compatibility

• Engine Family: AQ, TAMD, TMD, BB

Full model list at the end of this description.

⚙️ Key Features

• OEM Volvo Penta part number 1585449
• Early type version - confirm build specification before ordering
• System group: Cables and Fuses
• Net weight: 0.001 kg
• Fits AQ, BB, TMD and TAMD series marine petrol and diesel engines, plus 400/500-series units

🔌 Function

The gasket forms a sealing interface at an electrical connection or housing joint, keeping water, salt spray and dirt out of the enclosed contacts. Maintaining that seal protects the circuit from corrosion and intermittent faults.

⚠️ Common Signs of Failure

• Hardening, cracking or crumbling of the gasket material with age and heat
• Water or salt residue found inside the sealed housing or connector
• Corrosion or green deposits on the enclosed terminals and contacts
• Intermittent electrical faults, blown fuses or unexplained circuit dropouts
• Visible compression set or flattening so the gasket no longer takes up the joint gap

🛠️ Service Notes

• Fit a new gasket every time the joint is disturbed — a gasket takes a permanent set once it has been torqued and will not seal reliably a second time
• Scrape both faces back to clean bare metal, keeping the blade at a shallow angle so it lifts the old material without gouging the surface, and use a plastic scraper on aluminium castings
• Check the faces for flatness, cracks and corrosion pitting, and make sure no old gasket, carbon or hardened sealant is left in the corners or around the bolt holes
• Fit the gasket dry unless the workshop manual for your engine calls for a sealant, and then only the type it specifies — surplus sealant squeezes out into oil, coolant and fuel passages
• Draw the fasteners down progressively in the sequence and to the torque given in the manual for your engine, and recheck after the first heat cycle where the manual asks for it

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta 500A, 501A, 501B, 570A, 430A, 431A, 432A, 434A, 500B, 571A
• Volvo Penta TAMD74P-A, TAMD74P-B, TAMD74A, TAMD74C-A, TAMD74C-B, TAMD74L-A, TAMD74L-B
• Volvo Penta TAMD162C-C, TAMD162A, TAMD162B, TAMD162C, TAMD162C-B
• Volvo Penta AQ271A, AQ271C, AQ271B, AQ271D
• Volvo Penta TAMD122A, TAMD122D, TAMD122P-A, TAMD122P-B
• Volvo Penta AQ225D, AQ225E, AQ225F
• Volvo Penta TAMD72A, TAMD72P-A, TAMD72WJ-A
• Volvo Penta AQ200D, AQ200F
• Volvo Penta AQ231A, AQ231B
• Volvo Penta AQ260A, AQ260B
• Volvo Penta AQ311A, AQ311B
• Volvo Penta TAMD102A, TAMD102D
• Volvo Penta TAMD163A-A, TAMD163P-A
• Volvo Penta TAMD165A, TAMD165C
• Volvo Penta TAMD63L-A, TAMD63P-A
• Volvo Penta TAMD71B, TAMD71A
• Volvo Penta TAMD73P-A, TAMD73WJ-A
• Volvo Penta AQ175A
• Volvo Penta AQ205A
• Volvo Penta AQ211A
• Volvo Penta AQ290A
• Volvo Penta BB231A
• Volvo Penta BB261A
• Volvo Penta TAMD121D
• Volvo Penta TAMD60C
• Volvo Penta TAMD61A
• Volvo Penta TAMD62A
• Volvo Penta TAMD70E
• Volvo Penta TAMD75P-A
• Volvo Penta TMD102A
• Volvo Penta TMD121C
• Volvo Penta TMD122A