1587040 Bracket | Genuine Volvo Penta Part

🔧 Product Description

This is a genuine Volvo Penta bracket from the inlet and exhaust system group, used to mount and support components within the air intake and exhaust arrangement. It secures the assembly against engine vibration and keeps connected pipework and hardware correctly aligned. The bracket is a light, single-piece support component with a net weight of 0.174 kg.

🚤 Compatibility

• Engine Family: AQ, TD, TWD, BB, TID, D, B, MD, MB, AQD

Full model list at the end of this description.

⚙️ Key Features

• OEM Volvo Penta part number 1587040
• System group: Inlet and Exhaust System
• Net weight: 0.174 kg
• Fits AQ, BB, MB, MD, B20, TD, TID and TWD series petrol and diesel engines
• Supplied as an individual bracket

🔌 Function

The bracket provides a rigid mounting point that holds inlet or exhaust system components in their correct position on the engine. It transfers load and resists vibration so that connected pipes, hoses and fittings are not stressed in service.

⚠️ Common Signs of Failure

• Visible cracking or fracture across the bracket body or around mounting holes
• Corrosion, pitting or scaling that weakens the bracket in the marine environment
• Elongated, worn or stripped mounting holes allowing the supported component to shift
• Rattling, knocking or excessive vibration from an unsupported inlet or exhaust component
• Misalignment or strain on attached pipework, hoses or clamps caused by a bent bracket

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 787759 - Related compressor
• 787760 - Related guide flange
• 787770 - Related gear
• 786804 - Related hose

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta TID121KG, TID121KGP, TID121KP, TID121KPB, TID121L, TID121LG, TID121LGP, TID121LP, TID121LPB, TID121K, TID121K-87
• Volvo Penta TD121G-87, TD121GGP-87, TD121G, TD121GG, TD121GGP, TD121GP, TD121GPB
• Volvo Penta AQ130C, AQ130D, AQ130A, AQ130B
• Volvo Penta AQ170B, AQ170C, AQ170A
• Volvo Penta BB115A, BB115B, BB115C
• Volvo Penta BB170B, BB170C, BB170A
• Volvo Penta MB20A, MB20B, MB20C
• Volvo Penta AQ115A, AQ115B
• Volvo Penta 100S, 110S
• Volvo Penta TD100G-85, TD100G
• Volvo Penta TID100K, TID100K-87
• Volvo Penta AQ165A
• Volvo Penta AQD21A
• Volvo Penta B20
• Volvo Penta BB165A
• Volvo Penta D45BPP
• Volvo Penta MD21A
• Volvo Penta TD1030VE
• Volvo Penta TD120HP
• Volvo Penta TD45B
• Volvo Penta TD60D-83
• Volvo Penta TD70G-83
• Volvo Penta TID60D
• Volvo Penta TID70G
• Volvo Penta TWD1030ME
• Volvo Penta TWD1230ME