1619819 Temperature Sensor | Genuine Volvo Penta Part

🔧 Product Description

This is a genuine Volvo Penta temperature sensor from the Instruments system group, supplied as an individual replacement unit. It monitors engine temperature and feeds the reading to the instrument panel gauge or engine control system. It is catalogued for the DH10A engine.

🚤 Compatibility

Typically suits:

• Volvo Penta DH10A

• Engine Family: DH

⚙️ Key Features

• Measures charge-air temperature for engine monitoring and control
• M16 x 1.5 threaded installation
• Operating range up to approximately 150°C
• VDO reference family 323 805 030 001
• Engine type: Volvo Penta DH10 10-litre diesel

🔌 Function

The temperature sensor measures coolant or engine temperature and converts it into an electrical signal for the gauge or engine management system. This allows the operator to monitor running temperature and provides the input needed for overheat warnings.

⚠️ Common Signs of Failure

• Temperature gauge reading erratically, sticking at zero, or pegging at maximum
• False overheat alarms with no actual cooling system fault
• Intermittent or dropping-out signal as the engine warms up
• Corroded, cracked or damaged connector terminals at the sensor
• Coolant weeping or seepage around the sensor body or threads

🛠️ Service Notes

• Check the replacement is the sensor specified for your engine and instrumentation — sensors sharing a thread can have quite different characteristics, and a mismatch gives plausible but wrong readings
• Let the engine cool and depressurise the system before removing a sensor from a coolant or oil passage, and be ready for the fluid that will come out
• Clean the threads and sealing face in the housing, fit a new sealing washer or O-ring where one is used, and do not pack the threads with sealant on a sensor that earths through its body
• Tighten to the figure in the workshop manual with a spanner on the hexagon only — these bodies crack easily and the thread in an alloy housing is easily stripped
• Reconnect the plug or terminal clean and secure, route the lead clear of hot and moving parts, then top up, bleed and run the engine and check the reading is sensible and steady while watching the joint for weeps

🔄 Supersession & Cross Reference

Other-Brand OEM Numbers

• VDO 14-323-1419
• Continental / VDO: 323 805 030 001

Aftermarket / Verified Equivalents

• DT Spare Parts: 2.15022
• Febi Bilstein: 39137
• Air Fren: 25.2500.13
• Auger: 79054
• Cojali: 2260400
• Sampa: 093.267
• ST-Templin: 01.050.8715.950
• Sampa: 93267

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging