1619957 Gasket | Genuine Volvo Penta Part
1619957 Gasket | Genuine Volvo Penta Part
Couldn't load pickup availability
Available from Volvo Penta international
Typically reaches our store in 10–14 business days
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
Genuine Volvo Penta gasket, part number 1619957, used as a sealing element on a broad span of Volvo Penta petrol and diesel marine, industrial and generator-set engines. It supersedes the earlier gasket 324359 and carries that number forward, so it is the current replacement for engines originally built with the older item. As a single-use sealing component it should always be renewed whenever the joint it seals is disturbed.
🚤 Compatibility
- Engine Family: AQ, TAD, TD, TWD, TID, TMD, BB, B, AD, TAMD, MD, MB, AQD
Full model list at the end of this description.
⚙️ Key Features
- OEM Volvo Penta part number 1619957
- Supersedes and replaces earlier part number 324359
- Net weight approximately 0.002 kg
- Fits AQ, BB, B20/MB20, MD/TMD/TAMD31 and AD31 engines plus TD, TID, TWD and TAD 61, 71, 100, 121, 710, 730, 1030, 1210 and 1230 series units
- Single-use sealing component intended for renewal at every reassembly
- Engine type: Volvo Penta 6-, 7- and 12-litre diesel applications
🔌 Function
The gasket forms a sealed joint between two mating engine components, preventing the escape of fluid, gas or pressure across that face. It compresses on assembly to take up minor surface irregularities and maintain a leak-free seal in service.
⚠️ Common Signs of Failure
- Visible weeping, seepage or dripping at the joint face
- Hardened, brittle or cracked gasket material found on inspection
- Loss of pressure or compression across the sealed joint
- Flattened, crushed or torn sections that will not re-seal after disturbance
- Fluid contamination or residue tracking down from the mating surface
🛠️ Service Notes
- Fit a new gasket every time the joint is disturbed — a gasket takes a permanent set once it has been torqued and will not seal reliably a second time
- Scrape both faces back to clean bare metal, keeping the blade at a shallow angle so it lifts the old material without gouging the surface, and use a plastic scraper on aluminium castings
- Check the faces for flatness, cracks and corrosion pitting, and make sure no old gasket, carbon or hardened sealant is left in the corners or around the bolt holes
- Fit the gasket dry unless the workshop manual for your engine calls for a sealant, and then only the type it specifies — surplus sealant squeezes out into oil, coolant and fuel passages
- Draw the fasteners down progressively in the sequence and to the torque given in the manual for your engine, and recheck after the first heat cycle where the manual asks for it
🔄 Supersession & Cross Reference
OEM Supersession Chain
- 1619957 → Supersedes 324359
OEM / Related Numbers
- 324359 earlier number superseded by this part
- 330634 - associated pipe flange
- 1626068 - related compressor governor gasket
- 975610 - related compressor O-ring
- 1697704 - related compressor-connection gasket kit containing 1619957
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
🔎 Full Model Compatibility
Typically suits:
- Volvo Penta TID121KG, TID121KGP, TID121KP, TID121KPB, TID121L, TID121LG, TID121LGP, TID121LP, TID121LPB, TID121K, TID121K-87
- Volvo Penta TD121G-87, TD121GGP-87, TD121G, TD121GG, TD121GGP, TD121GP, TD121GPB
- Volvo Penta TD61A, TD61ACE, TD61AG, TD61AGP, TD61AP, TD61APB, TD61AW
- Volvo Penta TD71A, TD71ACE, TD71AG, TD71AGP, TD71AP, TD71APB, TD71AW
- Volvo Penta TID71A, TID71AG, TID71AGP, TID71AP, TID71APB
- Volvo Penta AQ130C, AQ130D, AQ130A, AQ130B
- Volvo Penta AQ170B, AQ170C, AQ170A
- Volvo Penta BB115A, BB115B, BB115C
- Volvo Penta BB170B, BB170C, BB170A
- Volvo Penta MB20A, MB20B, MB20C
- Volvo Penta AD31, AD31B
- Volvo Penta AQ115A, AQ115B
- Volvo Penta 100S, 110S
- Volvo Penta TAD1030P, TAD1030V
- Volvo Penta TAMD31A, TAMD31B
- Volvo Penta TD100G-85, TD100G
- Volvo Penta TID100K, TID100K-87
- Volvo Penta TID61AG, TID61AGP
- Volvo Penta TMD31A, TMD31B
- Volvo Penta TWD1210G, TWD1210P
- Volvo Penta TWD1211P, TWD1211G
- Volvo Penta TWD710P, TWD710PB
- Volvo Penta AQ165A
- Volvo Penta AQD21A
- Volvo Penta B20
- Volvo Penta BB165A
- Volvo Penta MD21A
- Volvo Penta MD31A
- Volvo Penta TAD730P
- Volvo Penta TD120HP
- Volvo Penta TD1210G
- Volvo Penta TD610M
- Volvo Penta TWD1030ME
- Volvo Penta TWD1031VE
- Volvo Penta TWD1230ME
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
