1677365 Shim | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta Shim - Part Number: 1677365

This genuine Volvo Penta shim is a calibrated valve-clearance shim used in the exhaust-valve clearance adjustment. It is manufactured to the original Volvo dimensional, material and interface requirements so the serviced assembly retains its designed alignment, sealing, load capacity and operating reliability. Calibrated shim thickness: 3.80 mm. In service, it sets exhaust-valve clearance by providing a calibrated 3.80 mm thickness at the designated valve-train position. Selection must be confirmed by OEM part number 1677365, the exact engine/product model, serial number and the installed assembly configuration.

⚙️ Key Features

• Genuine Volvo Penta OEM shim

• OEM part number 1677365

• Documented application: exhaust-valve clearance adjustment

• Validated family: Volvo Penta 11-litre TAD1140-TAD1142VE industrial diesel valve train

• Calibrated shim thickness: 3.80 mm

• Primary function: Sets exhaust-valve clearance by providing a calibrated 3.80 mm thickness at the designated valve-train position

• Measure valve clearance with the engine at the specified condition, select the calculated thickness and recheck after installation

• Kit/service relationship: Part of the thickness range supplied/managed through Volvo valve-adjustment shim kit 85111158

🔄 Supersession & Cross Reference

OEM Supersession Chain:

• 1677365 (current/original OEM service reference)

OEM / Related Numbers:

• 1677365

Aftermarket / Verified Equivalents:

• No aftermarket equivalent

🚤 Compatibility

Commonly used on:

• exhaust-valve clearance adjustment

Typically suits:

• Engine / product models:

• TAD1140VE, TAD1141VE, TAD1142VE

• Engine / Application Family: Volvo Penta 11-litre TAD1140-TAD1142VE industrial diesel valve train

• Serial / Configuration Note: Confirm part number 1677365 against the serialised Volvo parts list and the installed assembly before ordering; adjacent production variants may use a different size, thickness, orientation or connection.

🔌 Function

Sets exhaust-valve clearance by providing a calibrated 3.80 mm thickness at the designated valve-train position. Measure valve clearance with the engine at the specified condition, select the calculated thickness and recheck after installation.

Common signs of failure:

• Valve clearance outside the specified range

• Valve-train ticking, clatter or abnormal mechanical noise

• Loss of compression or rough running from insufficient clearance

• Reduced valve lift/timing consistency from excessive clearance

• Burnt valve/seat risk or accelerated cam and follower wear

📦 Condition

• Genuine Volvo Penta part

• Brand new

• Supplied in original or equivalent packaging