1677695 Splice | Genuine Volvo Penta Part

🔧 Product Description

This genuine Volvo Penta splice is a coolant-pump shaft sleeve/coupling used in the coolant-pump spindle sleeve/splice. It is manufactured to the original Volvo dimensional, material and interface requirements so the serviced assembly retains its designed alignment, sealing, load capacity and operating reliability. OEM catalogue cross-description: sleeve/splice for the coolant-pump spindle. In service, it provides the serviceable sleeve or coupling interface on the coolant-pump spindle. Selection must be confirmed by OEM part number 1677695, the exact engine/product model, serial number and the installed assembly configuration.

🚤 Compatibility

• Engine Family: TAD, TWD

Full model list at the end of this description.

⚙️ Key Features

• Genuine Volvo Penta OEM splice
• OEM part number 1677695
• OEM catalogue cross-description: sleeve/splice for the coolant-pump spindle
• Confirm shaft fit and orientation, inspect for corrosion or scoring and renew associated seal components

🔌 Function

The splice forms a connecting piece between two lengths of coolant pipe or hose, providing sealing faces or barbs at each end so the run can be made up and clamped. It maintains bore continuity so coolant flow is not restricted at the joint.

⚠️ Common Signs of Failure

• Coolant weeping, dripping or crusted residue at either joint
• Loss of coolant with no other obvious leak point
• Corrosion, pitting or scaling of the splice body
• Cracking or splitting at the barb or sealing land
• Hoses working loose at the splice due to a worn sealing surface

🛠️ Service Notes

• This is a mechanical sleeve/coupling on the coolant-pump spindle, not an electrical cable splice like other parts catalogued under this type — do not confuse it with a crimp connector when ordering
• Fits together with coolant-pump spindle 3979940 in the same pump assembly — check both are the correct current specification when replacing the splice
• Confirm shaft fit and orientation before fitting, inspect the mating surfaces for corrosion or scoring, and renew the associated seal components at the same time

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta TAD1241GE, TAD1241VE, TAD1241-42VE
• Volvo Penta TAD1341-43GE-B, TAD1341VE, TAD1341GE
• Volvo Penta TAD1344-45GE-B, TAD1344VE, TAD1344GE
• Volvo Penta TAD1242GE, TAD1242VE
• Volvo Penta TAD1250VE, TAD1250-52VE
• Volvo Penta TAD1342VE, TAD1342GE
• Volvo Penta TAD1343VE, TAD1343GE
• Volvo Penta TAD1345GE, TAD1345VE
• Volvo Penta TAD1350GE, TAD1350VE
• Volvo Penta TAD1351GE, TAD1351-53VE
• Volvo Penta TAD1240GE
• Volvo Penta TAD1251VE
• Volvo Penta TAD1252VE
• Volvo Penta TAD1340VE
• Volvo Penta TAD1346GE
• Volvo Penta TAD1352GE
• Volvo Penta TAD1353GE
• Volvo Penta TAD1354GE
• Volvo Penta TAD1355GE
• Volvo Penta TAD1360-62VE
• Volvo Penta TAD1363-65VE
• Volvo Penta TAD1371-75VE
• Volvo Penta TWD1240VE