1698671 Bearing | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta bearing, supporting a rotating shaft and carrying its load while allowing free rotation. It is listed across the TAD, TD, TWD and TID industrial and generator-set diesel engine ranges. Bearing condition governs shaft alignment and the smoothness of the assembly.

🚤 Compatibility

• Engine Family: TAD, TD, TWD, TID

Full model list at the end of this description.

⚙️ Key Features

• Precision bearing for the Wabco 704 compressor crankshaft
• Used in compressor 1626060
• Supports radial loading from the twin-cylinder compressor
• Requires inspection of the crankshaft and bearing housing
• Confirmed Wabco and Volvo cross references
• Engine type: Volvo Penta 6-, 7-, 10-, 12- and 16-litre diesel applications

🔌 Function

The bearing carries radial and axial load from a rotating shaft while allowing it to turn with minimal friction, holding the shaft concentric within its housing. Correct clearance and lubrication are what determine its service life.

⚠️ Common Signs of Failure

• Rumbling, growling or whining noise from the assembly
• Detectable play or roughness when the shaft is turned by hand
• Excessive heat at the bearing housing in service
• Pitting, spalling or discolouration of the races and rolling elements
• Metal debris in the oil or on the drain plug

🛠️ Service Notes

• Keep the bearing wrapped until you fit it and work clean — dirt trapped in at assembly is a leading cause of early failure
• Inspect the shaft and housing seats for wear, scoring and burrs; a new bearing in a worn seat only repeats the failure
• Press or drive squarely on the race being fitted, using a drift or tube that contacts the ring face fully, so the load never passes through the balls, rollers or bearing surface; never strike the bearing itself
• Lubricate with the grade specified for that assembly, and where the bearing takes an adjustable preload or endfloat, set it by the workshop manual procedure rather than by feel
• Renew the adjacent seal whenever a bearing is replaced — access is already open, and a failed seal is often what killed the bearing

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 1626060 - Wabco 704 complete compressor
• 0697888 - related Volvo references
• 697888 - related Volvo references
• 1101171 - related Volvo reference
• 1349208 - related Volvo reference
• 895 251 020 2 - Wabco reference

Other-Brand OEM Numbers

• Wabco: 895 251 020 2

Aftermarket / Verified Equivalents

• DT Spare Parts: 2.44830
• Vaden Original: 7900 850 001

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta TD61A, TD61ACE, TD61AG, TD61AGP, TD61AP, TD61APB, TD61AW
• Volvo Penta TD71A, TD71ACE, TD71AG, TD71AGP, TD71AP, TD71APB, TD71AW
• Volvo Penta TID71A, TID71AG, TID71AGP, TID71AP, TID71APB
• Volvo Penta TWD1210G, TWD1210P, TWD1210PB, TWD1210V
• Volvo Penta TAD1030P, TAD1030V, TAD1030VE
• Volvo Penta TD121G-87, TD121GP, TD121GPB
• Volvo Penta TWD1211V, TWD1211P, TWD1211G
• Volvo Penta TWD710P, TWD710PB, TWD710V
• Volvo Penta TAD730P, TAD730V
• Volvo Penta TD730ME, TD730VE
• Volvo Penta TID61AG, TID61AGP
• Volvo Penta TWD1230ME, TWD1230VE
• Volvo Penta TWD610P, TWD610PB
• Volvo Penta TAD1230V
• Volvo Penta TD100G
• Volvo Penta TD1030VE
• Volvo Penta TD1210G
• Volvo Penta TD164KAE
• Volvo Penta TD610M
• Volvo Penta TD630ME
• Volvo Penta TWD1030ME
• Volvo Penta TWD1031VE
• Volvo Penta TWD1231VE
• Volvo Penta TWD630ME
• Volvo Penta TWD730ME
• Volvo Penta TWD731VE
• Volvo Penta TWD740VE