1699581 Gasket | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta gasket for the fuel system, sealing a fuel joint face against leakage. It supersedes part numbers 1698192 and 240948 and is also included in the small parts kit. It is listed across the TWD, TID, TMD, TAMD, TD and TAD engine ranges.

🚤 Compatibility

• Engine Family: TWD, TID, TMD, TAMD, TD, TAD

Full model list at the end of this description.

⚙️ Key Features

• OEM Volvo Penta part number 1699581
• Supersedes parts 1698192 and 240948
• Also included in the small parts kit
• System group: Fuel System
• Net weight: 0.041 kg
• Fits TWD, TID, TMD, TAMD, TD and TAD series engines
• Engine type: Volvo Penta 7- and 12-litre diesel applications

📋 Kit Contents

• Included in small parts kit.

🔌 Function

The gasket compresses between two fuel system faces to form a fuel-tight joint, taking up surface irregularities so fuel cannot weep past. It also prevents air being drawn in on the suction side of the system.

⚠️ Common Signs of Failure

• Fuel weeping, dripping or staining at the joint
• Air drawn into the fuel system causing hard starting or rough running
• Hardened, flattened or torn gasket found on removal
• Joint requiring repeated re-tightening to stay sealed
• Fuel smell or residue around the joint area

🛠️ Service Notes

• Fit a new gasket every time the joint is disturbed — a gasket takes a permanent set once it has been torqued and will not seal reliably a second time
• Scrape both faces back to clean bare metal, keeping the blade at a shallow angle so it lifts the old material without gouging the surface, and use a plastic scraper on aluminium castings
• Check the faces for flatness, cracks and corrosion pitting, and make sure no old gasket, carbon or hardened sealant is left in the corners or around the bolt holes
• Fit the gasket dry unless the workshop manual for your engine calls for a sealant, and then only the type it specifies — surplus sealant squeezes out into oil, coolant and fuel passages
• Draw the fasteners down progressively in the sequence and to the torque given in the manual for your engine, and recheck after the first heat cycle where the manual asks for it

🔄 Supersession & Cross Reference

OEM Supersession Chain

• 1699581 → Supersedes 1698192 → Supersedes 240948

OEM / Related Numbers

• 1698192 earlier number superseded by this part
• 240948 earlier number superseded by this part
• 240947 - bearing cover
• 244406 - bearing
• 240023 - roller bearing
• 864299 - camshaft seal
• 243299 - related O-ring
• 845240 - related repair kit

Other-Brand OEM Numbers

• Bosch: 2 411 015 046

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta TWD1210G, TWD1210P, TWD1210PB, TWD1210V
• Volvo Penta TAD1030G, TAD1030V, TAD1030VE
• Volvo Penta TAD730G, TAD730P, TAD730V
• Volvo Penta TWD1211V, TWD1211P, TWD1211G
• Volvo Penta TAMD122A, TAMD122A/C
• Volvo Penta TAMD71B, TAMD71A
• Volvo Penta TAMD73P-A, TAMD73WJ-A
• Volvo Penta TD121GP, TD121GPB
• Volvo Penta TD730ME, TD730VE
• Volvo Penta TWD630ME, TWD630VE
• Volvo Penta TWD710G, TWD710V
• Volvo Penta TAD1230G
• Volvo Penta TAD1231GE
• Volvo Penta TAD1232GE
• Volvo Penta TD100G
• Volvo Penta TD1010G
• Volvo Penta TD1030VE
• Volvo Penta TD1210G
• Volvo Penta TD610M
• Volvo Penta TD630ME
• Volvo Penta TD71A
• Volvo Penta TD710G
• Volvo Penta TID71A
• Volvo Penta TMD100C
• Volvo Penta TMD122A
• Volvo Penta TWD1010G
• Volvo Penta TWD1030ME
• Volvo Penta TWD1031VE
• Volvo Penta TWD1230ME
• Volvo Penta TWD730ME
• Volvo Penta TWD731VE