17276 Split Pin | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta split pin, locking a castellated nut or retaining a clevis pin against working loose. It is also included in the gasket kit and is listed across DPH, D, TMD, AD, DP and TAMD series engines and drives. Split pins are single-use and must always be renewed.

🚤 Compatibility

• Engine Family: DPH, D, TMD, AD, DP, TAMD, KAD, KAMD
• HP Range: 13-400 HP

Full model list at the end of this description.

⚙️ Key Features

• OEM Volvo Penta part number 17276
• Also included in the gasket kit
• Single-use item - always fit new
• Fits DPH, D, TMD, AD, DP and TAMD series engines and drives
• Engine type: Sterndrive hardware
• TH=0.40mm (Volvo assembly listing)
• Quantity varies by assembly, most commonly one

📋 Kit Contents

• Included in gasket kit.

🔌 Function

The split pin passes through a drilled hole and its legs are bent apart, mechanically preventing a nut or pin from rotating or sliding out. It is a positive locking device that does not rely on friction.

⚠️ Common Signs of Failure

• Pin found sheared, corroded or missing on inspection
• Castellated nut backing off or clevis pin working out
• Legs fatigued or broken from being bent and reused
• Elongation or wear of the drilled hole
• Any refitted pin, which should be replaced as a matter of course

🛠️ Service Notes

• Always fit a new split pin; a pin that has been opened and closed once has work-hardened and its legs will break off in service
• Use the pin size specified for the hole so it fills it without slack — an undersized pin lets the nut or clevis move and will wear through
• Pass the pin fully through, then bend the legs firmly around the nut or shaft so nothing can catch on them, and trim them back rather than leaving long ends
• Check that the castellated nut, clevis or fork is at its correct setting before the pin goes in — the pin locks the setting, it does not create it
• Inspect the hole and the surrounding component for wear and elongation from a previously loose or missing pin

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 24075023 - service kit containing 17276

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta D1-30, D1-30B, D1-30F, D1-13, D1-13B, D1-13F, D1-20, D1-20B, D1-20F
• Volvo Penta D6-330A-F, D6-370A-F, D6-300A-F, D6-300A-G, D6-340A-G, D6-380A-G, D6-400A-G, D6-400A-F
• Volvo Penta D4-260A-F, D4-300A-F, D4-225A-F, D4-150A-G, D4-230A-G, D4-270A-G, D4-300A-G
• Volvo Penta TAMD41H-A, TAMD41H-B, TAMD41P-A, TAMD41P
• Volvo Penta AD31D, AD31D-A, AD31XD
• Volvo Penta D2-40, D2-40B, D2-40F
• Volvo Penta TAMD31M, TAMD31M-A, TAMD31D
• Volvo Penta KAMD42B, KAMD42P-A
• Volvo Penta DP-D1
• Volvo Penta DPH-D1
• Volvo Penta KAD42B
• Volvo Penta TAMD42B
• Volvo Penta TMD31D
• Volvo Penta TMD41L-A