17427991 Oil Filter Housing | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta Oil Filter Housing - Part Number: 17427991

This genuine Volvo Penta oil filter housing is a machined structural housing or closure component used in the alternative-mounting oil-filter assembly. It is manufactured to the original Volvo dimensional, material and interface requirements so the serviced assembly retains its designed alignment, sealing, load capacity and operating reliability. In service, it houses the engine-oil filtration and bypass components and provides the correct ports for the alternative filter mounting arrangement. Selection must be confirmed by OEM part number 17427991, the exact engine/product model, serial number and installed configuration.

⚙️ Key Features

• Genuine Volvo Penta OEM oil filter housing

• OEM part number 17427991

• Documented application: alternative-mounting oil-filter assembly

• Validated family: Volvo Penta 11-litre TAD11 industrial diesel

• Primary function: Houses the engine-oil filtration and bypass components and provides the correct ports for the alternative filter mounting arrangement.

• Measure bearing bores and sealing faces, check alignment and cracks, renew gaskets/seals and tighten the housing in the specified sequence.

🔄 Supersession & Cross Reference

OEM Supersession Chain:

• 17427991 (current/original OEM service reference)

OEM / Related Numbers:

• 17427991

• 471085 valve cone

• 466653 compression spring

• 17468786 O-ring

• 17425684 plug

• 466623 nipple (quantity 2)

• 469904 nipple

Aftermarket / Verified Equivalents:

• No aftermarket equivalent

🚤 Compatibility

Commonly used on:

• alternative-mounting oil-filter assembly

Typically suits:

• Engine / product models:

• TAD1140VE

• TAD1141VE

• TAD1142VE

• TAD1150VE

• TAD1151VE

• TAD1152VE

• TAD1170VE

• TAD1171VE

• TAD1172VE

• TAD1180VE

• TAD1181VE

• TAD1182VE

• TAD1183VE

• Engine / Application Family: Volvo Penta 11-litre TAD11 industrial diesel

• Serial / Configuration Note: Confirm part number 17427991 against the exact engine/product serial number, housing option, mounting interface and adjoining bearing/seal arrangement.

🔌 Function

Houses the engine-oil filtration and bypass components and provides the correct ports for the alternative filter mounting arrangement. Measure bearing bores and sealing faces, check alignment and cracks, renew gaskets/seals and tighten the housing in the specified sequence.

Common signs of failure:

• Cracking, distortion, corrosion or impact damage

• Bearing bore, thread or sealing-face wear outside service limits

• Oil, coolant or contaminant leakage through the housing joint

• Misalignment causing repeated bearing, gear, shaft or seal failure

• Loose mounting, fretting or inability to retain the adjoining component

📦 Condition

• Genuine Volvo Penta part

• Brand new

• Supplied in original or equivalent packaging