17460059 Mounting Ring | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta Mounting Ring - Part Number: 17460059

This genuine Volvo Penta mounting ring is a precision fluid-sealing component used in the rear crankshaft radial-seal position at the flywheel housing. It is manufactured to the original Volvo dimensional, material and interface requirements so the serviced assembly retains its designed alignment, sealing, load capacity and operating reliability. Although listed in some catalogues as a mounting ring, this number is also catalogued as the D13 rear radial sealing ring. In service, it forms the rear crankshaft radial seal at the flywheel-housing interface to retain engine oil and exclude contamination. Selection must be confirmed by OEM part number 17460059, the exact engine/product model, serial number and installed configuration.

⚙️ Key Features

• Genuine Volvo Penta OEM mounting ring

• OEM part number 17460059

• Documented application: rear crankshaft radial-seal position at the flywheel housing

• Validated family: Volvo Penta/Volvo D13 and TAD13 heavy-duty diesel

• Although listed in some catalogues as a mounting ring, this number is also catalogued as the D13 rear radial sealing ring

• Primary function: Forms the rear crankshaft radial seal at the flywheel-housing interface to retain engine oil and exclude contamination.

• Clean and inspect the shaft, groove and mating surfaces; lubricate only where specified and install without twisting, cutting or contaminating the seal.

🔄 Supersession & Cross Reference

OEM Supersession Chain:

• 17460059 (current/original OEM service reference)

OEM / Related Numbers:

• 17460059

• 1543896

• 15438963

• Rear crankshaft/flywheel-housing seal position

Aftermarket / Verified Equivalents:

• SLP PB-3896

• Blumaq VOE17460059

🚤 Compatibility

Commonly used on:

• rear crankshaft radial-seal position at the flywheel housing

Typically suits:

• Engine / product models:

• TAD1340VE

• TAD13-series engines and flywheel-housing assemblies specifying 17460059

• Engine / Application Family: Volvo Penta/Volvo D13 and TAD13 heavy-duty diesel

• Serial / Configuration Note: Confirm part number 17460059 against the exact product serial number, shaft diameter, housing bore and seal orientation; nearby production variants may use a different seal size or material.

🔌 Function

Forms the rear crankshaft radial seal at the flywheel-housing interface to retain engine oil and exclude contamination. Clean and inspect the shaft, groove and mating surfaces; lubricate only where specified and install without twisting, cutting or contaminating the seal.

Common signs of failure:

• Visible oil, coolant, fuel or water leakage at the sealed joint

• Hardened, cracked, flattened, cut or swollen sealing material

• Loss of system pressure or lubricant level

• Contamination entering the housing or fluid crossing the joint

• Repeat leakage caused by shaft grooves, corrosion or damaged mating faces

📦 Condition

• Genuine Volvo Penta part

• Brand new

• Supplied in original or equivalent packaging