17467641 Nipple | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta Nipple - Part Number: 17467641

This genuine Volvo Penta nipple is a formed or machined fluid-transfer component used in the flywheel-housing/lower-gear oil-pipe connection. It is manufactured to the original Volvo dimensional, material and interface requirements so the serviced assembly retains its designed alignment, sealing, load capacity and operating reliability. In service, it connects the lower-gear oil pipework to the housing gallery at the specified angle and thread. Selection must be confirmed by OEM part number 17467641, the exact engine/product model, serial number and installed configuration.

⚙️ Key Features

• Genuine Volvo Penta OEM nipple

• OEM part number 17467641

• Documented application: flywheel-housing/lower-gear oil-pipe connection

• Validated family: Volvo Penta 11-litre TAD11 industrial diesel

• Primary function: Connects the lower-gear oil pipework to the housing gallery at the specified angle and thread.

• Confirm the line sits without preload, renew associated seals and clamps, and pressure-test the relevant circuit after installation.

🔄 Supersession & Cross Reference

OEM Supersession Chain:

• 17467641 (current/original OEM service reference)

OEM / Related Numbers:

• 17467641

• 11127861 oil pipe

• 11127862 oil pipe

Aftermarket / Verified Equivalents:

• No aftermarket equivalent

🚤 Compatibility

Commonly used on:

• flywheel-housing/lower-gear oil-pipe connection

Typically suits:

• Engine / product models:

• TAD1140VE

• TAD1141VE

• TAD1142VE

• TAD1150VE

• TAD1151VE

• TAD1152VE

• TAD1170VE

• TAD1171VE

• TAD1172VE

• TAD1180VE

• TAD1181VE

• TAD1182VE

• TAD1183VE

• Engine / Application Family: Volvo Penta 11-litre TAD11 industrial diesel

• Serial / Configuration Note: Confirm part number 17467641 against the exact engine/product serial number, connection thread, bend geometry and routing; visually similar lines and fittings are not automatically interchangeable.

🔌 Function

Connects the lower-gear oil pipework to the housing gallery at the specified angle and thread. Confirm the line sits without preload, renew associated seals and clamps, and pressure-test the relevant circuit after installation.

Common signs of failure:

• Visible fluid seepage, staining or wetness at the pipe or connections

• Cracking, chafing, corrosion, deformation or impact damage

• Restricted flow caused by carbon, sludge, scale or internal collapse

• Loose supports or vibration fretting at clamps and brackets

• Pressure loss, aeration or reduced system performance under load

📦 Condition

• Genuine Volvo Penta part

• Brand new

• Supplied in original or equivalent packaging