17471655 Pipe | Genuine Volvo Penta Part

🔧 Product Description

This genuine Volvo Penta pipe is a formed or machined fluid-transfer component used in the engine pump-unit pipe assembly. It is manufactured to the original Volvo dimensional, material and interface requirements so the serviced assembly retains its designed alignment, sealing, load capacity and operating reliability. In service, it routes fluid within the engine pump-unit installation while maintaining the specified alignment and connection geometry. Selection must be confirmed by OEM part number 17471655, the exact engine/product model, serial number and installed configuration.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD1170-72VE

• Engine Family: TAD

⚙️ Key Features

• OEM Volvo Penta part number 17471655
• Supersedes part 17249480
• System group: Lubricating and Oil System
• Net weight: 0.299 kg
• Fits TAD-series industrial diesel engines

🔌 Function

Routes fluid within the engine pump-unit installation while maintaining the specified alignment and connection geometry. Confirm the line sits without preload, renew associated seals and clamps, and pressure-test the relevant circuit after installation.

⚠️ Common Signs of Failure

• Oil weeping or dripping from the pipe or its unions
• Cracking or fatigue fracture at bends and clamping points
• Chafing or abrasion where the pipe contacts other parts
• Denting, kinking or internal fouling restricting flow
• Corrosion or pitting of the pipe wall

🛠️ Service Notes

• Offer the pipe up and check it reaches both connections freely before you tighten anything — a rigid pipe pulled into place is a pipe left under permanent strain, and strained pipes crack at the fittings in service
• Renew the sealing washers, O-rings or union seals that go with the pipe rather than reusing the old ones, and make sure the seats, faces and threads are clean
• Keep the ends capped while you work and blow or flush a pipe through before fitting; anything left inside goes straight into the oil, fuel or coolant system
• Tighten unions and banjo bolts evenly to the figures in the workshop manual for your engine — overtightening distorts the seat and starts the leak you were trying to cure
• Refit every clip and support bracket in its original place and keep the pipe clear of hot or moving parts so it cannot chafe or be shaken to failure

🔄 Supersession & Cross Reference

OEM Supersession Chain

• 17471655 → Supersedes 17249480

OEM / Related Numbers

• 17249480 earlier number superseded by this part
• 54165459 pump unit
• 976795 O-ring
• 949746 clamp
• 984733 flange screw
• 23290616 oil pressure pipe
• 968007 O-ring
• 984738 flange screw (quantity 2)
• 984736 flange screw
• 977639 nipple

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging