17495065 Oil Pan | Genuine Volvo Penta Part
17495065 Oil Pan | Genuine Volvo Penta Part
Couldn't load pickup availability
🔧 Product Description
This genuine Volvo Penta oil pan is a formed lower-crankcase oil reservoir used in the engine lower crankcase oil-pan and lubrication-reservoir assembly. It is manufactured to the original Volvo dimensional, material and interface requirements so the serviced assembly retains its designed alignment, sealing, load capacity and operating reliability. In service, it collects returning engine oil, supplies the oil-pump pickup reservoir and seals the lower crankcase. Selection must be confirmed by OEM part number 17495065, the exact engine/product model, serial number and installed configuration.
🚤 Compatibility
Typically suits:
- Volvo Penta TAD1180-83VE
- Engine Family: TAD
⚙️ Key Features
- Genuine Volvo Penta OEM oil pan
- OEM part number 17495065
- Clean and inspect the sump and crankcase sealing rails, verify oil-pickup clearance, renew the gasket/sealant and drain-plug seal, and tighten the pan in the specified sequence.
🔌 Function
Collects returning engine oil, supplies the oil-pump pickup reservoir and seals the lower crankcase. Clean and inspect the sump and crankcase sealing rails, verify oil-pickup clearance, renew the gasket/sealant and drain-plug seal, and tighten the pan in the specified sequence.
⚠️ Common Signs of Failure
- Oil leakage at the pan joint face or drain plug
- Cracking or impact damage to the pan body
- Corrosion or pitting, particularly at the lowest points
- Distorted sealing flange causing a persistent leak
- Stripped or damaged drain plug threads
🛠️ Service Notes
- Clean both faces down to bare metal and remove every trace of old gasket or sealant; a hardened ridge will hold the pan off its face and leak
- Check the flange for distortion around the bolt holes — pans are routinely pulled out of shape by over-tightening and will not seal until the flange is flat again
- Fit a new gasket, or apply sealant only where the manual for your engine specifies it; where sealant is used, assemble and tighten within its working time and let it cure before adding oil
- Tighten evenly in stages, working out from the centre, to the figures and sequence in the workshop manual — even tightening matters far more here than force
- Renew the drain plug sealing washer, clean the pickup and strainer while the pan is off, and refill with the grade and quantity specified for your engine before starting
🔄 Supersession & Cross Reference
OEM Supersession Chain
- 17495065 → Supersedes 15190531
OEM / Related Numbers
- 15190531 earlier number superseded by this part
- 15127201 retainer
- 11127354 magnetic plug
- 968209 O-ring
- 21523327 pipe
- 948610 O-ring
- 968612 plug
- 11162582 nipple
- 22964705 oil filler pipe
- 20808091 oil filler pipe
- 20807510 oil filler cap
- 15112438 sensor
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
Share
