180110 Elbow Nipple | Genuine Volvo Penta Part

🔧 Product Description

This genuine Volvo Penta elbow nipple is a formed or machined fluid-transfer component used in the legacy angled fluid-line connection. It is manufactured to the original Volvo dimensional, material and interface requirements so the serviced assembly retains its designed alignment, sealing, load capacity and operating reliability. In service, it changes fluid-line direction while providing the specified threaded hose or pipe connection. Selection must be confirmed by OEM part number 180110, the exact engine/product model, serial number and installed configuration.

🚤 Compatibility

• Engine Family: MD, TMD, AQ, TAD, TD, TAMD, D, TWD, TID, BB, MS, B, DH, MB, AQD

Full model list at the end of this description.

⚙️ Key Features

• OEM Volvo Penta part number 180110
• Supersedes parts 824469, 941672 and 823805
• Replaces the earlier pipe 954314 / nipple 954342 / nut 954321 arrangement, used with a hose
• Net weight: 0.0363 kg
• Fits MD, TMD, AQ, TAD, TD and TAMD series engines
• Also supersedes Volvo part numbers 823806 and 847750

🔌 Function

Changes fluid-line direction while providing the specified threaded hose or pipe connection. Confirm the line sits without preload, renew associated seals and clamps, and pressure-test the relevant circuit after installation.

⚠️ Common Signs of Failure

• Weeping, dripping or staining at either connection
• Damaged, stripped or cross-threaded threads
• Corrosion, pitting or damage to the sealing faces
• Cracking at the elbow bend or thread root
• Connection loosening under vibration

🛠️ Service Notes

• Clean both threads and check the sealing face or cone is unmarked before the fitting goes anywhere near the engine
• Seal the joint the way that thread is designed to be sealed — sealing washer, O-ring or thread sealant on a tapered thread — and renew the soft parts rather than reusing them
• Aim the elbow so the hose or pipe leaves it in a natural line, and hold that alignment while tightening; twisting the hose round afterwards to correct the angle loads the joint
• Do not over-tighten to cure a weep, particularly into aluminium or cast housings — strip the joint, find out why it leaked and reseal it properly
• Support the hose or pipe so it is not left hanging on the fitting and passing its vibration into the joint

🔄 Supersession & Cross Reference

OEM Supersession Chain

• 180110 → Supersedes 823805

OEM / Related Numbers

• 824469 earlier number superseded by this part
• 941672 earlier number superseded by this part
• 823805 earlier number superseded by this part

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta 2003, 2003R, 2003R SOLAS, 100S, 110S, 120S-B, 2003TB, 2003TB SOLAS, 120SC, 2001AG, 2001B, 2001BG, 2001D, 2003D, 2003T, 2003TR, 2002AG, 2002B, 2002BG, 2002D, 2003B, 2003B SOLAS, 2003 SOLAS, 2001, 2002, 2001R
• Volvo Penta TID121KG, TID121KGP, TID121KP, TID121KPB, TID121L, TID121LG, TID121LGP, TID121LP, TID121LPB, TID121FG, TID121K, TID121K-87
• Volvo Penta TD100G-85, TD100A, TD100G, TD100GG, TD100GGP, TD100HP, TD100HPB, TD100GG-85, TD100GP, TD100GP-85
• Volvo Penta TID100KG, TID100KGP, TID100K, TID100K-87, TID100KGP-87, TID100KP, TID100KP-87, TID100KPB-87
• Volvo Penta TD121G-87, TD121GGP-87, TD121G, TD121GG, TD121GGP, TD121GP, TD121GPB
• Volvo Penta TAMD74P-A, TAMD74P-B, TAMD74C-A, TAMD74C-B, TAMD74L-A, TAMD74L-B
• Volvo Penta TD120C, TD120A, TD120G, TD120GG PP, TD120HP, TD120GG
• Volvo Penta TAMD122A/C, TAMD122D, TAMD122P-A, TAMD122P-B, TAMD122P-C
• Volvo Penta AQ130C, AQ130D, AQ130A, AQ130B
• Volvo Penta TAD1630G, TAD1630GE, TAD1630P, TAD1630PB
• Volvo Penta TD60D-83, TD60A, TD60B, TD60D
• Volvo Penta TID162AG, TID162AGP, TID162AP, TID162APB
• Volvo Penta TWD1630G, TWD1630P, TWD1630PP, TWD1630V
• Volvo Penta AQ170B, AQ170C, AQ170A
• Volvo Penta BB115A, BB115B, BB115C
• Volvo Penta BB170B, BB170C, BB170A
• Volvo Penta MB20A, MB20B, MB20C
• Volvo Penta MD100A, MD100B, MD100B-CC
• Volvo Penta MS2B-A, MS2B, MS2V
• Volvo Penta TAD1030P, TAD1030GE, TAD1030V
• Volvo Penta TD70G, TD70B, TD70G-83
• Volvo Penta AQ115A, AQ115B
• Volvo Penta D100A, D100B
• Volvo Penta TAD1031G, TAD1031GE
• Volvo Penta TAD1631GE, TAD1631G
• Volvo Penta TAMD120A, TAMD120B
• Volvo Penta TAMD63L-A, TAMD63P-A
• Volvo Penta TAMD73P-A, TAMD73WJ-A
• Volvo Penta TMD120A, TMD120B
• Volvo Penta TWD1210G, TWD1210P
• Volvo Penta TWD1211P, TWD1211G
• Volvo Penta TWD740GE, TWD740VE
• Volvo Penta AQ165A
• Volvo Penta AQD21A
• Volvo Penta B20
• Volvo Penta BB165A
• Volvo Penta D120A
• Volvo Penta D2002AG
• Volvo Penta D2003AG
• Volvo Penta D70B
• Volvo Penta DH10A
• Volvo Penta MD120A
• Volvo Penta MD21A
• Volvo Penta MD70B
• Volvo Penta TAD1032GE
• Volvo Penta TAD1240GE
• Volvo Penta TAD1241GE
• Volvo Penta TAD1242GE
• Volvo Penta TAD740GE
• Volvo Penta TAD741GE
• Volvo Penta TAMD72P-A
• Volvo Penta TAMD75P-A
• Volvo Penta TD1010G
• Volvo Penta TD1030VE
• Volvo Penta TD1210G
• Volvo Penta TD164KAE
• Volvo Penta TD71AG
• Volvo Penta TID60D
• Volvo Penta TID70G
• Volvo Penta TID71AG
• Volvo Penta TMD100A
• Volvo Penta TWD1010G
• Volvo Penta TWD1030ME
• Volvo Penta TWD1031VE
• Volvo Penta TWD1230ME
• Volvo Penta TWD1231VE
• Volvo Penta TWD1620G