180761 Plug | Genuine Volvo Penta Part

🔧 Product Description

This genuine Volvo Penta plug is a machined structural housing or closure component used in the legacy engine or driveline gallery closure. It is manufactured to the original Volvo dimensional, material and interface requirements so the serviced assembly retains its designed alignment, sealing, load capacity and operating reliability. In service, it closes the specified drilled gallery or service opening and retains the operating fluid. Selection must be confirmed by OEM part number 180761, the exact engine/product model, serial number and installed configuration.

🚤 Compatibility

• Engine Family: MD, TMD, D, TD, AQ, AQD, TAD, TAMD, TWD, TID, BB, THD, THAMD, B, DH, MB

Full model list at the end of this description.

⚙️ Key Features

• OEM Volvo Penta part number 180761
• Early type
• Net weight: 0.0363 kg
• Fits MD, TMD, D, TD, AQ and AQD series engines

🔌 Function

Closes the specified drilled gallery or service opening and retains the operating fluid. Measure bearing bores and sealing faces, check alignment and cracks, renew gaskets/seals and tighten the housing in the specified sequence.

⚠️ Common Signs of Failure

• Weeping, seeping or dripping around the plug
• Damaged, stripped or cross-threaded threads
• Rounded or damaged drive recess preventing removal
• Corrosion or pitting of the plug or sealing face
• Plug loosening under vibration and pressure cycling

🛠️ Service Notes

• Clean the threads and the seating face before fitting, and make sure the opening itself is clear of old sealant, swarf and corrosion
• Renew the sealing washer or O-ring where one is fitted rather than reusing a flattened one, and only use thread sealant where the workshop manual for your engine calls for it
• Tighten to the figure given in the workshop manual for your engine — plugs in aluminium and other soft castings strip easily, and a plug pulled up hard to cure a leak usually distorts the seat and makes it worse
• Where the plug closes an oil, fuel or coolant passage, run the engine up to temperature afterwards and check the joint under pressure before signing the job off
• Keep removed plugs paired with the holes they came out of during a strip-down — plugs of very similar appearance often differ in thread, reach or sealing type

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta TD100AHC, TD100ARC, TD100G-85, TD100A, TD100CHC, TD100G, TD100GG, TD100GGP, TD100HP, TD100HPB, TD100GG-85, TD100GP, TD100GP-85, TD100CRC
• Volvo Penta TID121KG, TID121KGP, TID121KP, TID121LG, TID121LGP, TID121LP, TID121FG, TID121K, TID121K-87
• Volvo Penta TD121G-87, TD121GGP-87, TD121G, TD121GG, TD121GGP, TD121GP, TD121CHC, TD121CRC
• Volvo Penta TID100KG, TID100KGP, TID100K, TID100K-87, TID100KGP-87, TID100KP, TID100KP-87, TID100KPB-87
• Volvo Penta TAMD74P-A, TAMD74P-B, TAMD74A, TAMD74C-A, TAMD74C-B, TAMD74L-A, TAMD74L-B
• Volvo Penta TAMD122A, TAMD122A/C, TAMD122D, TAMD122P-A, TAMD122P-B, TAMD122P-C
• Volvo Penta TD120A, TD120GG, TD120AHC, TD120ARC, TD120BHC, TD120BRC
• Volvo Penta AQD70B, AQD70BL, AQD70CL, AQD70D, AQD70C
• Volvo Penta TAD1030P, TAD1030G, TAD1030GE, TAD1030V, TAD1030VE
• Volvo Penta TAMD162C-C, TAMD162A, TAMD162B, TAMD162C, TAMD162C-B
• Volvo Penta AQ130C, AQ130D, AQ130A, AQ130B
• Volvo Penta D100A, D100BHC, D100BRC, D100B
• Volvo Penta TAMD70B, TAMD70E, TAMD70C, TAMD70D
• Volvo Penta TD60D-83, TD60A, TD60B, TD60D
• Volvo Penta TID162AG, TID162AGP, TID162AP, TID162APB
• Volvo Penta TWD610G, TWD610P, TWD610PB, TWD610V
• Volvo Penta TWD710G, TWD710P, TWD710PB, TWD710V
• Volvo Penta AQ170B, AQ170C, AQ170A
• Volvo Penta BB115A, BB115B, BB115C
• Volvo Penta BB170B, BB170C, BB170A
• Volvo Penta D70CHC, D70CRC, D70B
• Volvo Penta MB20A, MB20B, MB20C
• Volvo Penta MD100A, MD100B, MD100B-CC
• Volvo Penta TAD120AHC, TAD120BHC, TAD120CHC
• Volvo Penta TAD1630G, TAD1630GE, TAD1630P
• Volvo Penta TAD730G, TAD730P, TAD730V
• Volvo Penta TAMD165A, TAMD165C, TAMD165P
• Volvo Penta TAMD60A, TAMD60B, TAMD60C
• Volvo Penta TD70CHC, TD70CRC, TD70G-83
• Volvo Penta THD102KB, THD102KD, THD102K-KB
• Volvo Penta TWD1210G, TWD1210P, TWD1210V
• Volvo Penta TWD1211V, TWD1211P, TWD1211G
• Volvo Penta TWD1630G, TWD1630P, TWD1630V
• Volvo Penta AQ115A, AQ115B
• Volvo Penta MD70B, MD70C
• Volvo Penta 100S, 110S
• Volvo Penta TAD1031G, TAD1031GE
• Volvo Penta TAD1230G, TAD1230V
• Volvo Penta TAD1631GE, TAD1631G
• Volvo Penta TAMD102A, TAMD102D
• Volvo Penta TAMD120A, TAMD120B
• Volvo Penta TAMD163A-A, TAMD163P-A
• Volvo Penta TAMD63L-A, TAMD63P-A
• Volvo Penta TAMD72P-A, TAMD72WJ-A
• Volvo Penta TAMD73P-A, TAMD73WJ-A
• Volvo Penta TD610G, TD610V
• Volvo Penta TD730ME, TD730VE
• Volvo Penta THAMD70C, THAMD70B
• Volvo Penta TID60DG, TID60D
• Volvo Penta TMD100A, TMD100C
• Volvo Penta TMD120A, TMD120B
• Volvo Penta TMD70C, TMD70B
• Volvo Penta TWD1230ME, TWD1230VE
• Volvo Penta TWD740GE, TWD740VE
• Volvo Penta AQ165A
• Volvo Penta AQD21A
• Volvo Penta B20
• Volvo Penta BB165A
• Volvo Penta D120A
• Volvo Penta DH10A
• Volvo Penta MD120A
• Volvo Penta MD21A
• Volvo Penta TAD1032GE
• Volvo Penta TAD121CHC
• Volvo Penta TAD1231GE
• Volvo Penta TAD1232GE
• Volvo Penta TAD740GE
• Volvo Penta TAD741GE
• Volvo Penta TAMD103A
• Volvo Penta TAMD121D
• Volvo Penta TAMD71B
• Volvo Penta TAMD75P-A
• Volvo Penta TD1010G
• Volvo Penta TD1030VE
• Volvo Penta TD1210G
• Volvo Penta TD164KAE
• Volvo Penta TD630VE
• Volvo Penta TD640VE
• Volvo Penta TD71A
• Volvo Penta TD710G
• Volvo Penta TID70G
• Volvo Penta TID71A
• Volvo Penta TMD102A
• Volvo Penta TMD121C
• Volvo Penta TMD122A
• Volvo Penta TWD1010G
• Volvo Penta TWD1030ME
• Volvo Penta TWD1031VE
• Volvo Penta TWD1231VE
• Volvo Penta TWD630VE
• Volvo Penta TWD730ME
• Volvo Penta TWD731VE