183366 Needle Roller Assembly | Genuine Volvo Penta Part

🔧 Product Description

This genuine Volvo Penta needle roller assembly is a precision rolling-element or raceway component used in the reverse-gear selector and gear-lever needle-bearing position. It is manufactured to the original Volvo dimensional, material and interface requirements so the serviced assembly retains its designed alignment, sealing, load capacity and operating reliability. In service, it supports the selector or gear-lever shaft with compact needle rollers so engagement movement remains smooth and accurately located. Selection must be confirmed by OEM part number 183366, the exact engine/product model, serial number and installed configuration.

🚤 Compatibility

Typically suits:

• Volvo Penta MD7B
• Volvo Penta MB10A
• Volvo Penta MD1B
• Volvo Penta MD2B
• Volvo Penta MD3B
• Volvo Penta MD6A
• Volvo Penta MD6B
• Volvo Penta MD7A
• Volvo Penta MD67C
• Volvo Penta MD5A
• Volvo Penta MD5B
• Volvo Penta MD5C
• Volvo Penta MD11C
• Volvo Penta MD11D
• Volvo Penta AQD2B
• Volvo Penta MD17C
• Volvo Penta MD17D

• Engine Family: MD, MB, AQD

⚙️ Key Features

• OEM Volvo Penta part number 183366
• Needle roller assembly, larger section
• Net weight 0.136 kg
• Fits MD, MB and AQD series engines

🔌 Function

Supports the selector or gear-lever shaft with compact needle rollers so engagement movement remains smooth and accurately located. Measure shaft and housing fits, renew contaminated lubricant and related seals, and install using force only through the race being fitted. Set preload or end float to the applicable Volvo Penta specification.

⚠️ Common Signs of Failure

• Rumbling or whining under load
• Scoring or indentation of the shaft running surface
• Rollers seized, flattened or out of the cage
• Play or vibration at the shaft
• Steel particles in the oil

🛠️ Service Notes

• Keep everything clean and work with clean dry hands and tools; needle bearings are intolerant of both grit and moisture
• Never press on the rollers or the cage — press only on the end face of the outer shell, using a drift or tube that matches its diameter so the load passes straight through
• Where the shell has a marked or lettered face, that face takes the drift; press the bearing in square and to the depth the manual gives
• Check the housing bore and the shaft or journal for wear, scoring and corrosion before fitting, because a new needle bearing on a worn shaft will not last
• Prime or pack the bearing with the specified lubricant before assembly and renew the adjacent seals so the new bearing stays clean

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging