191095 Nipple | Genuine Volvo Penta Part

🔧 Product Description

This genuine Volvo Penta nipple is a machined fluid-line fitting designed to match the specified thread, bore and connection geometry used in the legacy Volvo Penta engine fluid-line connection. It is manufactured to the original Volvo Penta dimensional, material and interface requirements so the serviced assembly retains its designed alignment, sealing, load capacity and operating reliability. In service, it provides a rigid threaded connection for the specified hose or pipe. Selection must be confirmed by OEM part number 191095, the exact engine or product model, serial number and installed configuration.

🚤 Compatibility

• Engine Family: MD, TMD, TAD, TD, TWD, TID, TAMD, D
• Serial Range: MD70BK spec 867116 MOXXXX/9685-

Full model list at the end of this description.

⚙️ Key Features

• OEM part number 191095
• Confirm thread form and line size, keep passages clean, renew sealing washers or thread seals and support connected pipes without preload.

🔌 Function

Provides a rigid threaded connection for the specified hose or pipe. Confirm thread form and line size, keep passages clean, renew sealing washers or thread seals and support connected pipes without preload.

⚠️ Common Signs of Failure

• Visible fuel, oil, coolant or hydraulic-fluid seepage
• Air entering the circuit or loss of prime
• Cracked body, damaged threads or distorted sealing faces
• Restricted flow from corrosion, contamination or an incorrect fitting
• Pipe stress, vibration fretting or repeated loosening at the connection

🛠️ Service Notes

• Check the bore is clear before fitting — a nipple is often the feed point or restriction for a circuit, and debris left in it will starve whatever it supplies
• On tapered threads use the paste or liquid sealant specified for the fluid concerned, applied a few threads back from the open end; avoid thread tape on fuel and oil lines, where a shed shred travels downstream into filters, pumps and injectors
• Where the nipple seals on a face or against a washer rather than on its thread, fit a new sealing washer instead of curing a weep by overtightening
• Tighten to the figure in the workshop manual for your engine — these are small fittings in castings and are easily stripped, or the surrounding boss cracked
• Support the pipe or hose so it meets the nipple square and without side load, then check the joint at working pressure and temperature

🔄 Supersession & Cross Reference

OEM Supersession Chain

• 191095 → Supersedes 16393

OEM / Related Numbers

• 836273 earlier number superseded by this part
• 836434 earlier number superseded by this part
• 16393 earlier number superseded by this part

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta TID121KG, TID121KGP, TID121KP, TID121KPB, TID121L, TID121LG, TID121LGP, TID121LP, TID121LPB, TID121K, TID121K-87
• Volvo Penta TD100G-85, TD100A, TD100G, TD100GG, TD100GGP, TD100HP, TD100HPB, TD100GG-85, TD100GP, TD100GP-85
• Volvo Penta TD120C, TD120A, TD120G, TD120GG PP, TD120HP, TD120HPP, TD120GG
• Volvo Penta TD121G-87, TD121GGP-87, TD121G, TD121GG, TD121GGP, TD121GP, TD121GPB
• Volvo Penta TD61A, TD61ACE, TD61AG, TD61AGP, TD61AP, TD61APB, TD61AW
• Volvo Penta TD71A, TD71ACE, TD71AG, TD71AGP, TD71AP, TD71APB, TD71AW
• Volvo Penta TID100KG, TID100K, TID100K-87, TID100KGP-87, TID100KP, TID100KP-87, TID100KPB-87
• Volvo Penta TAD1030P, TAD1030G, TAD1030GE, TAD1030V, TAD1030VE
• Volvo Penta TID71A, TID71AG, TID71AGP, TID71AP, TID71APB
• Volvo Penta TAMD162C-C, TAMD162A, TAMD162C, TAMD162C-B
• Volvo Penta TD60D-83, TD60A, TD60B, TD60D
• Volvo Penta TID162AG, TID162AGP, TID162AP, TID162APB
• Volvo Penta TWD1210G, TWD1210P, TWD1210PB, TWD1210V
• Volvo Penta TWD610G, TWD610P, TWD610PB, TWD610V
• Volvo Penta TWD710G, TWD710P, TWD710PB, TWD710V
• Volvo Penta MD100A, MD100B, MD100B-CC
• Volvo Penta TAD1630G, TAD1630GE, TAD1630P
• Volvo Penta TAD730G, TAD730P, TAD730V
• Volvo Penta TAMD122A, TAMD122A/C, TAMD122D
• Volvo Penta TD610G, TD610M, TD610V
• Volvo Penta TD70G, TD70B, TD70G-83
• Volvo Penta TWD1211V, TWD1211P, TWD1211G
• Volvo Penta TWD1630G, TWD1630P, TWD1630V
• Volvo Penta D100A, D100B
• Volvo Penta TAD1230G, TAD1230V
• Volvo Penta TAD1631GE, TAD1631G
• Volvo Penta TAD1640-42GE-B, TAD1640GE
• Volvo Penta TAD1641GE, TAD1641VE
• Volvo Penta TAD1642GE, TAD1642VE
• Volvo Penta TAMD165A, TAMD165C
• Volvo Penta TAMD73P-A, TAMD73WJ-A
• Volvo Penta TD630ME, TD630VE
• Volvo Penta TD730ME, TD730VE
• Volvo Penta TID60DG, TID60D
• Volvo Penta TID61AG, TID61AGP
• Volvo Penta TWD1230ME, TWD1230VE
• Volvo Penta TWD630ME, TWD630VE
• Volvo Penta TWD740GE, TWD740VE
• Volvo Penta D120A
• Volvo Penta D42A
• Volvo Penta D45BPP
• Volvo Penta D70B
• Volvo Penta MD70B
• Volvo Penta TAD1231GE
• Volvo Penta TAD1232GE
• Volvo Penta TAD1643VE
• Volvo Penta TAD740GE
• Volvo Penta TAD741GE
• Volvo Penta TAMD103A
• Volvo Penta TAMD120A
• Volvo Penta TAMD121D
• Volvo Penta TAMD163A-A
• Volvo Penta TAMD71B
• Volvo Penta TAMD74A
• Volvo Penta TD1010G
• Volvo Penta TD1030VE
• Volvo Penta TD1210G
• Volvo Penta TD30A
• Volvo Penta TD31ACE
• Volvo Penta TD40A
• Volvo Penta TD45B
• Volvo Penta TD640VE
• Volvo Penta TD710G
• Volvo Penta TID70G
• Volvo Penta TMD100A
• Volvo Penta TMD120A
• Volvo Penta TMD121C
• Volvo Penta TMD122A
• Volvo Penta TWD1010G
• Volvo Penta TWD1030ME
• Volvo Penta TWD1031VE
• Volvo Penta TWD1231VE
• Volvo Penta TWD1620G
• Volvo Penta TWD730ME
• Volvo Penta TWD731VE