• 191830 Plug | Genuine Volvo Penta Part
1 1

191830 Plug | Genuine Volvo Penta Part

191830 Plug | Genuine Volvo Penta Part

$30.22 AUD
$30.22 AUD
Sale Sold out
Shipping calculated at checkout.

Available from Volvo Penta international

Typically reaches our store in 10–14 business days

Availability checked daily with Volvo Penta

✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide

🔧 Product Description

This genuine Volvo Penta plug is a threaded or press-fit closure designed for the specified housing, gallery or drain port used in the engine or transmission threaded port closure. It is manufactured to the original Volvo Penta dimensional, material and interface requirements so the serviced assembly retains its designed alignment, sealing, load capacity and operating reliability. In service, it closes the specified threaded inspection, drain or gallery port. Selection must be confirmed by OEM part number 191830, the exact engine or product model, serial number and installed configuration.

🚤 Compatibility

  • Engine Family: MD, MB, TMD, AQ, AD, AQAD, D, BB, TAMD, MS, HS, AQD, KAD, KAMD
  • HP Range: 50-75 HP

Full model list at the end of this description.

⚙️ Key Features

  • OEM part number 191830
  • Confirm thread and seal type, clean the port and tighten or seat the plug to specification.

🔌 Function

Closes the specified threaded inspection, drain or gallery port. Confirm thread and seal type, clean the port and tighten or seat the plug to specification.

⚠️ Common Signs of Failure

  • Fluid seepage or staining around the plug
  • Damaged threads, sealing face or drive feature
  • Corrosion, cracking or plug loosening
  • Contamination entering through an ineffective closure
  • Housing damage or repeat leakage caused by overtightening

🛠️ Service Notes

  • Clean the threads and the seating face before fitting, and make sure the opening itself is clear of old sealant, swarf and corrosion
  • Renew the sealing washer or O-ring where one is fitted rather than reusing a flattened one, and only use thread sealant where the workshop manual for your engine calls for it
  • Tighten to the figure given in the workshop manual for your engine — plugs in aluminium and other soft castings strip easily, and a plug pulled up hard to cure a leak usually distorts the seat and makes it worse
  • Where the plug closes an oil, fuel or coolant passage, run the engine up to temperature afterwards and check the joint under pressure before signing the job off
  • Keep removed plugs paired with the holes they came out of during a strip-down — plugs of very similar appearance often differ in thread, reach or sealing type

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

  • Volvo Penta 2003, 2003R, 2003R SOLAS, 120S-B, 740A, 2003TB, 2003TB SOLAS, 230A, 230B, 250A, 250B, 251A, 280B, 290DP, 120SC, 2001AG, 2001B, 2001BG, 2001D, 2003D, 2003T, 2003TR, 2002AG, 2002B, 2002BG, 2002D, 2003B, 2003B SOLAS, 2003 SOLAS, 2001, 2002, 2001R
  • Volvo Penta D2-55, D2-55B, D2-55C, D2-55D, D2-55E, D2-55F, D2-50F, D2-75, D2-75B, D2-75C, D2-75F, D2-60F
  • Volvo Penta AD41P-B, AD41B, AD41D, AD41, AD41A, AD41BJ
  • Volvo Penta AD31, AD31B, AD31D, AD31D-A, AD31XD
  • Volvo Penta BB225A, BB225AV, BB225B, BB225C
  • Volvo Penta MD2010, MD2010B, MD2010-C, MD2010-D
  • Volvo Penta MD2020, MD2020B, MD2020-C, MD2020-D
  • Volvo Penta MD2030, MD2030B, MD2030-C, MD2030-D
  • Volvo Penta MD2040, MD2040B, MD2040-C, MD2040-D
  • Volvo Penta TAMD31M, TAMD31A, TAMD31B, TAMD31D
  • Volvo Penta TAMD41B, TAMD41D, TAMD41M-A, TAMD41A
  • Volvo Penta AQ225D, AQ225E, AQ225F
  • Volvo Penta BB260AV, BB260B, BB260C
  • Volvo Penta D41, D41B, D41D
  • Volvo Penta KAD42A, KAD42B, KAD42P-A
  • Volvo Penta KAMD42A, KAMD42B, KAMD42P-A
  • Volvo Penta MD22A, MD22L, MD22P
  • Volvo Penta MD5A, MD5B, MD5C
  • Volvo Penta MS2B-A, MS2B, MS2V
  • Volvo Penta TMD22A, TMD22B, TMD22P-C
  • Volvo Penta TMD31A, TMD31B, TMD31D
  • Volvo Penta TMD40A, TMD40B, TMD40C
  • Volvo Penta TMD41A, TMD41B, TMD41D
  • Volvo Penta AQ200D, AQ200F
  • Volvo Penta AQ260A, AQ260B
  • Volvo Penta AQAD40B, AQAD40A
  • Volvo Penta MD11C, MD11D
  • Volvo Penta MD17C, MD17D
  • Volvo Penta MD6A, MD6B
  • Volvo Penta MD7B, MD7A
  • Volvo Penta MS3B, MS3C
  • Volvo Penta TAMD40A, TAMD40B
  • Volvo Penta AD30A
  • Volvo Penta AD40B
  • Volvo Penta AQ120B
  • Volvo Penta AQ125A
  • Volvo Penta AQ140A
  • Volvo Penta AQ145A
  • Volvo Penta AQ175A
  • Volvo Penta AQ290A
  • Volvo Penta AQAD30A
  • Volvo Penta AQD2B
  • Volvo Penta AQD40A
  • Volvo Penta BB140A
  • Volvo Penta BB145A
  • Volvo Penta BB740A
  • Volvo Penta D2002AG
  • Volvo Penta D2003AG
  • Volvo Penta HS1A
  • Volvo Penta MB10A
  • Volvo Penta MD1B
  • Volvo Penta MD2B
  • Volvo Penta MD3B
  • Volvo Penta MD30A
  • Volvo Penta MD31A
  • Volvo Penta MD40A
  • Volvo Penta MD67C
  • Volvo Penta MS4A
  • Volvo Penta MS5B
  • Volvo Penta TAMD22P-B
  • Volvo Penta TAMD30A
  • Volvo Penta TAMD42B
  • Volvo Penta TMD30A

Shipping & Delivery

Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details