192114 Plug | Genuine Volvo Penta Part

🔧 Product Description

This genuine Volvo Penta plug is a threaded or press-fit closure designed for the specified housing, gallery or drain port used in the engine or propulsion housing port closure. It is manufactured to the original Volvo Penta dimensional, material and interface requirements so the serviced assembly retains its designed alignment, sealing, load capacity and operating reliability. In service, it closes a drain, inspection or gallery port and maintains the housing seal. Selection must be confirmed by OEM part number 192114, the exact engine or product model, serial number and installed configuration.

🚤 Compatibility

• Engine Family: MD, D, TD, AQD, TAD, TWD, TID, TAMD, TMD

Full model list at the end of this description.

⚙️ Key Features

• OEM part number 192114
• Confirm thread and seal type, clean the port and tighten or seat the plug to specification.
• Quantity varies by assembly, most commonly one

🔌 Function

Closes a drain, inspection or gallery port and maintains the housing seal. Confirm thread and seal type, clean the port and tighten or seat the plug to specification.

⚠️ Common Signs of Failure

• Fluid seepage or staining around the plug
• Damaged threads, sealing face or drive feature
• Corrosion, cracking or plug loosening
• Contamination entering through an ineffective closure
• Housing damage or repeat leakage caused by overtightening

🛠️ Service Notes

• Clean the threads and the seating face before fitting, and make sure the opening itself is clear of old sealant, swarf and corrosion
• Renew the sealing washer or O-ring where one is fitted rather than reusing a flattened one, and only use thread sealant where the workshop manual for your engine calls for it
• Tighten to the figure given in the workshop manual for your engine — plugs in aluminium and other soft castings strip easily, and a plug pulled up hard to cure a leak usually distorts the seat and makes it worse
• Where the plug closes an oil, fuel or coolant passage, run the engine up to temperature afterwards and check the joint under pressure before signing the job off
• Keep removed plugs paired with the holes they came out of during a strip-down — plugs of very similar appearance often differ in thread, reach or sealing type

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta TID121KG, TID121KGP, TID121KP, TID121L, TID121LG, TID121LGP, TID121LP, TID121FG, TID121K, TID121K-87
• Volvo Penta TD120C, TD120A, TD120G, TD120GG PP, TD120HP, TD120HPP, TD120ARC
• Volvo Penta TD70CHC, TD70CRC, TD70G, TD70B, TD70G-83
• Volvo Penta D100A, D100BHC, D100BRC, D100B
• Volvo Penta TAD1030P, TAD1030G, TAD1030GE, TAD1030V
• Volvo Penta TD100AHC, TD100ARC, TD100A, TD100AG
• Volvo Penta TD60D-83, TD60A, TD60B, TD60D
• Volvo Penta D70CHC, D70CRC, D70B
• Volvo Penta MD100A, MD100B, MD100B-CC
• Volvo Penta TAMD60A, TAMD60B, TAMD60C
• Volvo Penta TD121G-87, TD121GGP-87, TD121GP
• Volvo Penta TWD1210G, TWD1210P, TWD1210V
• Volvo Penta TWD1211V, TWD1211P, TWD1211G
• Volvo Penta TAD1031G, TAD1031GE
• Volvo Penta TAD1230G, TAD1230V
• Volvo Penta TAMD70B, TAMD70E
• Volvo Penta TID120FG, TID120HPP
• Volvo Penta TID60DG, TID60D
• Volvo Penta TWD1230ME, TWD1230VE
• Volvo Penta AQD70B
• Volvo Penta D120A
• Volvo Penta D42A
• Volvo Penta D45BPP
• Volvo Penta MD120A
• Volvo Penta MD70B
• Volvo Penta TAD1032GE
• Volvo Penta TAD1231GE
• Volvo Penta TAD1232GE
• Volvo Penta TD1030VE
• Volvo Penta TD1210G
• Volvo Penta TD45B
• Volvo Penta TID70G
• Volvo Penta TMD70B
• Volvo Penta TWD1030ME
• Volvo Penta TWD1031VE
• Volvo Penta TWD1231VE