192538 Magnetic Plug | Genuine Volvo Penta Part

🔧 Product Description

This genuine Volvo Penta magnetic plug is a threaded magnetic plug that seals a lubricant port and captures ferrous wear debris used in the engine oil or gear-housing drain and wear-debris inspection point. It is manufactured to the original Volvo Penta dimensional, material and interface requirements so the serviced assembly retains its designed alignment, sealing, load capacity and operating reliability. In service, it seals the drain or inspection port while collecting ferrous wear particles from the lubricant. Selection must be confirmed by OEM part number 192538, the exact engine or product model, serial number and installed configuration.

🚤 Compatibility

• Engine Family: AQ, TD, TMD, TWD, TID, BB, AQD, TAMD, D, B, TAD, MD, MB

Full model list at the end of this description.

⚙️ Key Features

• Genuine Volvo Penta OEM magnetic plug
• OEM part number 192538
• Clean the magnet and threads, renew the sealing element and tighten to the specified torque.

🔌 Function

Seals the drain or inspection port while collecting ferrous wear particles from the lubricant. Clean the magnet and threads, renew the sealing element and tighten to the specified torque.

⚠️ Common Signs of Failure

• Oil leakage around the plug or sealing face
• Damaged threads or rounded drive surfaces
• Weak, broken or detached magnet
• Heavy chips or rapid ferrous-debris accumulation
• Plug seizure or housing damage caused by corrosion or overtightening

🛠️ Service Notes

• Clean the magnet completely at every oil change and read what comes off it — a light grey paste is normal wear, while flakes, chips or bright slivers mean something is breaking up and want investigating before the unit is run on
• Renew the sealing washer or O-ring each time the plug is removed, rather than pulling the plug up harder to cure a weep
• Check the magnet still holds firmly and is sound in its body; one that has weakened, cracked or worked loose collects nothing and can itself go through the system
• Tighten to the figure in the workshop manual for that housing — these plugs go into soft castings and are easily stripped
• Keep the plug and its threads clean of debris so it seats fully on its washer

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta TD100G-85, TD100A, TD100G, TD100GG, TD100GG-85, TD100GP, TD100GP-85
• Volvo Penta TD61A, TD61ACE, TD61AG, TD61AGP, TD61AP, TD61APB, TD61AW
• Volvo Penta TD71A, TD71ACE, TD71AG, TD71AGP, TD71AP, TD71APB, TD71AW
• Volvo Penta TD120C, TD120A, TD120G, TD120GG PP, TD120HPP, TD120GG
• Volvo Penta TID71A, TID71AG, TID71AGP, TID71AP, TID71APB
• Volvo Penta AQ130C, AQ130D, AQ130A, AQ130B
• Volvo Penta TD60D-83, TD60A, TD60B, TD60D
• Volvo Penta AQ170B, AQ170C, AQ170A
• Volvo Penta BB115A, BB115B, BB115C
• Volvo Penta BB170B, BB170C, BB170A
• Volvo Penta MB20A, MB20B, MB20C
• Volvo Penta TAMD60A, TAMD60B, TAMD60C
• Volvo Penta TAMD70E, TAMD70C, TAMD70D
• Volvo Penta TD70G, TD70B, TD70G-83
• Volvo Penta TID100KG, TID100K, TID100KP
• Volvo Penta TWD710G, TWD710P, TWD710PB
• Volvo Penta AQ115A, AQ115B
• Volvo Penta AQD70D, AQD70C
• Volvo Penta D100A, D100B
• Volvo Penta 100S, 110S
• Volvo Penta TAD730G, TAD730P
• Volvo Penta TAMD73P-A, TAMD73WJ-A
• Volvo Penta TD730ME, TD730VE
• Volvo Penta TID120FG, TID120HPP
• Volvo Penta TID60DG, TID60D
• Volvo Penta TID61AG, TID61AGP
• Volvo Penta TWD740GE, TWD740VE
• Volvo Penta AQ165A
• Volvo Penta AQD21A
• Volvo Penta B20
• Volvo Penta BB165A
• Volvo Penta D120A
• Volvo Penta D42A
• Volvo Penta D45BPP
• Volvo Penta D70B
• Volvo Penta MD21A
• Volvo Penta MD70C
• Volvo Penta TAD740GE
• Volvo Penta TAD741GE
• Volvo Penta TAMD71B
• Volvo Penta TAMD74A
• Volvo Penta TD40A
• Volvo Penta TD45B
• Volvo Penta TD710G
• Volvo Penta TID70G
• Volvo Penta TMD70C
• Volvo Penta TWD730ME
• Volvo Penta TWD731VE