20363742 Pressure Pipe | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta Pressure Pipe - Part Number: 20363742

This genuine Volvo Penta pressure pipe is a rigid formed high-pressure injection pipe calibrated for one specific pump-to-injector position used in the mechanical injection high-pressure delivery line, schematic position 11. It is manufactured to the original Volvo Penta dimensional, material and interface requirements so the serviced assembly retains its designed alignment, sealing, load capacity and operating reliability. In service, it carries precisely timed high-pressure fuel from the injection pump to its assigned injector without pressure loss or pulse distortion. Selection must be confirmed by OEM part number 20363742, the exact engine or product model, serial number and installed configuration.

⚙️ Key Features

• Genuine Volvo Penta OEM pressure pipe

• OEM part number 20363742

• Application: mechanical injection high-pressure delivery line, schematic position 11

• Engine / drive family: Volvo Penta/Volvo THD102K 10-litre mechanical-injection diesel

• Primary function: Carries precisely timed high-pressure fuel from the injection pump to its assigned injector without pressure loss or pulse distortion.

• Keep all ends capped until assembly, do not bend or interchange the pipe, align without preload and tighten both unions to specification.

🔄 Supersession & Cross Reference

OEM Supersession Chain:

• 20363742 (current/original OEM service reference)

OEM / Related Numbers:

• 20363742

• 478605 injector

• 469455 injector sealing ring

• 3979082 fuel pipe

• 1545081 leak-off pipe

• 20363745 companion pressure pipe

Aftermarket / Verified Equivalents:

• No aftermarket equivalent

🚤 Compatibility

Commonly used on:

• mechanical injection high-pressure delivery line, schematic position 11

Typically suits:

• Engine / product models:

• THD102K-KB

• THD102KD fuel-system installations using injector 478605

• Engine / Application Family: Volvo Penta/Volvo THD102K 10-litre mechanical-injection diesel

• Serial / Configuration Note: This formed pipe is position-specific at schematic key 11; do not bend or interchange it with another cylinder line.

🔌 Function

Carries precisely timed high-pressure fuel from the injection pump to its assigned injector without pressure loss or pulse distortion. Keep all ends capped until assembly, do not bend or interchange the pipe, align without preload and tighten both unions to specification.

Common signs of failure:

• Diesel misting or wetness at a flare or union

• Hard starting, misfire or uneven cylinder contribution

• Loss of power caused by pressure leakage

• Cracking or fretting at clamps and bends

• Distorted sealing cones or contamination introduced through an open pipe

📦 Condition

• Genuine Volvo Penta part

• Brand new

• Supplied in original or equivalent packaging